jlsparky7 Posted March 31, 2009 Report Posted March 31, 2009 Im going to be doing a couple how-tos real soon. I was wondering if you guys had pointers or tips for me. Heres what im going to cover. 1. Removing and cleaning the carb 2. Removing Engine from frame 3. Top end rebuild Im looking for tips like torque specs for the head bolts. Lube the cylinder and bearings before you install them. Use new plugs after a rebuild. Stuff like that. Trying to get a list of stuff to cover for each section. Quote
skinindustries Posted March 31, 2009 Report Posted March 31, 2009 What about a tranny rebuild?? or maybe like if someone wants to get into draging and they dont know where to start on the frame extention,you could make a video on pointers about that. dont know if those are good ideas. Quote
jlsparky7 Posted March 31, 2009 Author Report Posted March 31, 2009 (edited) What about a tranny rebuild?? or maybe like if someone wants to get into draging and they dont know where to start on the frame extention,you could make a video on pointers about that. dont know if those are good ideas. If I ever need to tear into the tranny I will write that up for sure. I just plan on doing those 3 things listed for now. I lost compression in both cylinders this winter so thats why im doing the top end rebuild. Edited March 31, 2009 by jlsparky7 Quote
brugal Posted March 31, 2009 Report Posted March 31, 2009 Nitrotate can help you, he did one of those last year. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.