Jump to content

Recommended Posts

Posted (edited)

I took off my new vforce3 reeds and one of the petals is up alittle bit on the corner, enough you can see under it. What could happen with the petal up. They only have i ride on them.If any one has seen my other post I fouled out right side plug and got a knock, could this be the cause?

Edited by steeler2169
Posted

Very well could be your problem??? Depends wether or not the petals are sealing under positive crankcase pressure. Warped petals, bent cages, etc. it happens sometimes... It is not uncommon for the petals to not sit perfectly tight against the cages when they are off the bike and being visually inspected either. With the air filters off and engine running... Do you have noticably more fuel "spitting" out the back of the right carb than the left carb? How do the left and right spark plugs compare? Is the right one noticably wetter before it fouls than the left?

Your sure it is fuel fouling? The carbs are at least somewhat synced? Right plug still fouling when you swap the plug wires? Any reason to suspect a bad right crankcase seal?

 

Posted (edited)

Take a feeler guage and see if the gap is more than .020. If it is then you have a problem. A lot of reed setups are gapped but they should close and most often do.

Edited by RollinRhino

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...