yammyboy3 Posted March 17, 2009 Report Posted March 17, 2009 ok so im going to in time when i get this settlement goin to be doing a 4 mill and well i was a retard the other night and tried to hand port my own cylinders like an idiot and thing i completly fucked myself does anyone have measurements of how far from the base and how low from the top on were there supposed to be im gonna do the cut domes no spacer plate and what size domes should i run pc pipes +4 timing 180 jets stock filter lid lost coming 4 mill noss head portjob need to know pretty much what else is needed i want to run 50/50 Quote
yammyboy3 Posted March 17, 2009 Author Report Posted March 17, 2009 right now if i can read it correctly from the base to the bottom of the intake port is 26cm on both sides and from the top of the cylinder to the top of the intakes is 70cm on both sides base to bottom of exhaust 72cm top of cylinder to top of exhaust is 31cm my intake bridge is roughly 7 cm wide in sleeve comes to direct point exahust is opend were the pipes are to 32cm does this all sound ok for running no spacer plate or did i screw myself Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.