SteelerBob Posted March 5, 2009 Report Posted March 5, 2009 Anyone ever drilled out a new set of holes in a 4x110 pair to make them fit the rears on a shee's 4x115? I am talking drilling out a whole net set of holes offset from the original holes, not trying to enlarge them. Don't think that would work too well. Quote
twizted269 Posted March 5, 2009 Report Posted March 5, 2009 i did this from my friend on her warrior with douglas rims and it worked fine. just make sure everything is centered. Quote
BUILDER Posted March 6, 2009 Report Posted March 6, 2009 Anyone ever drilled out a new set of holes in a 4x110 pair to make them fit the rears on a shee's 4x115? I am talking drilling out a whole net set of holes offset from the original holes, not trying to enlarge them. Don't think that would work too well. We have drilled most all of our wheels. We have acouple of guys that ride hondas in our group we we have drilled our wheels to fit both. Quote
zachass9 Posted March 6, 2009 Report Posted March 6, 2009 It has always worked for me!! I use an old hub that has the studs pressed out of it!! Kinda dumbie proof, which is always good for me!! LOL Good luck!! Z Quote
SteelerBob Posted March 6, 2009 Author Report Posted March 6, 2009 Well cool, good info to keep in mind. I was thinking about going for these, but think I might hold out for a set of straight blades. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...T&viewitem= Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.