wvelectrician Posted March 5, 2009 Report Share Posted March 5, 2009 will it cause it to backfire if so what size is that tube goin from carb to carb Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted March 5, 2009 Report Share Posted March 5, 2009 It's the same size as the fuel timing going to the petcock to the carbs. If you dont run it, it will have horrible low end and be a bitch to start. When i first built my shee, i forgot it was on there and i had TONS of problems with it. Put the crossover on and everything was fine. Quote Link to comment Share on other sites More sharing options...
wvelectrician Posted March 5, 2009 Author Report Share Posted March 5, 2009 It's the same size as the fuel timing going to the petcock to the carbs. If you dont run it, it will have horrible low end and be a bitch to start. When i first built my shee, i forgot it was on there and i had TONS of problems with it. Put the crossover on and everything was fine. all right sweet but will it be causeing it to backfire Quote Link to comment Share on other sites More sharing options...
lokisbuddy Posted March 5, 2009 Report Share Posted March 5, 2009 I am not certain but it may cause backfiring from it sucking too much air wouldnt it? Quote Link to comment Share on other sites More sharing options...
ryansedy Posted March 5, 2009 Report Share Posted March 5, 2009 i thought i had the same problem as u. but i took the carb and reeds off the side it was throwing flames out the back. and found out bottom of one of my pistons was broke. it would still run, but might want to check before you do more damage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.