roboz Posted February 28, 2009 Report Posted February 28, 2009 I just put new 33 pwk carbs on the shee, but i have the idle screws turned in all the way and no idle. The only way i can get it to idle is with the adjusters on top of the carbs. Does this sound right or am i missing something. Quote
Titan up Posted March 1, 2009 Report Posted March 1, 2009 That doesn't sound right. Do the idle screws even touch the slides at all? Are the screws long enough? Are you sure you're screwing in the idle screws and not the air screws? Quote
huskyohilux Posted March 1, 2009 Report Posted March 1, 2009 If correctly jetted and air screw position, and still no idle you might wanna shorten the springs behind the idle screws Quote
dajogejr Posted March 1, 2009 Report Posted March 1, 2009 If correctly jetted and air screw position, and still no idle you might wanna shorten the springs behind the idle screws Bingo...we have a winner... I would take the carb off, leave the top off...and just drop the slide in. Look through the back, turn the idle screw in and see if it'll even raise the slide. If not, as said...shorten that spring up. It should be able to lift the slide 1/16 to roughly 1/8... Quote
roboz Posted March 1, 2009 Author Report Posted March 1, 2009 Tanks, i will shorten up the springs and try that. I can get all the slack out of the cable and the screw won't raise the slides. Quote
XxMeltIcexX Posted March 1, 2009 Report Posted March 1, 2009 I'm probably just overcautious, but, when you adjust the idle open the throttle up because the idles are made out of plastic, youll chinger up the plastic screw if the slides are in the way... Another reason you dont see anything happening on screw in if they are worn out... Quote
roboz Posted March 4, 2009 Author Report Posted March 4, 2009 shortened the springs by 2 coils and it works perfect. Quote
dave5.0 Posted March 4, 2009 Report Posted March 4, 2009 Same problem. I just put 35mm A/S on mine. It won't idle either I'm spacing the cable to get it to idle at the moment. Will too big of a pilot keep it from idling? I'm going to try the spring thing also. There seems to be alot of spring in there. Quote
roboz Posted March 4, 2009 Author Report Posted March 4, 2009 Same problem. I just put 35mm A/S on mine. It won't idle either I'm spacing the cable to get it to idle at the moment. Will too big of a pilot keep it from idling? I'm going to try the spring thing also. There seems to be alot of spring in there. Yeah there is alot of spring in there,but it didn't take much to get her to idle.Cut off a couple rings and hopefully it will work for you. Not sure on the pilot. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.