05.Banshee.SE Posted February 8, 2009 Report Posted February 8, 2009 Quick question...do all the (seems like brass?) metal pieces come out of the carbs? I dissambeled them, but I don't know if the part that the needle jet goes into (the part that when you unscrew the main jet, it moves up and down slightly...it runs from the top of the main jet, up into the chamber) if that comes out or not? It moves slightly, but I don't want to force anything if I'm not supposed to. And I don't want to get carb cleaner on something I'm not supposed to... Quote
locogato11283 Posted February 8, 2009 Report Posted February 8, 2009 im sure they do come apart. ive never had to take my carbs apart. you can spray the shit out of them with carb cleaner. it wont hurt anything. Quote
05.Banshee.SE Posted February 8, 2009 Author Report Posted February 8, 2009 Hmm... That's what I did last time.... I was just going to make use of this gallon pail of carb cleaner I found on a shelf in the garage... I'll just brush them or something then. Thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.