LaegerBanshee Posted January 28, 2009 Report Share Posted January 28, 2009 I'm selling my Laeger ProTrax Duncan Racing Banshee which I finished in Oct. 2005. Bike has been sitting on the stand since then and it still has the "tits" on the tires. Asking $7,000 and I'm not looking for any trades. Bike is located roughly 50 miles west of Richmond, VA. Pics can be seen by looking at the Oct. 2005 Quad of Month listing. The bike was sold, but the deal fell through, so it is crated up and ready to go. Email me if you have any questions. Here are the specs: Frame: 98 Laeger Pro-Trax Banshee (250R Geometery) A Arms: Laeger Pro-Trax (+4) Swingarm: Laeger Pro-Trax CR500 Steering Stem: Laeger Pro-Trax Stbilizer: PEP Axle: RPM Dominator Carrier: Lonestar Locknut: Lonestar Hubs F|R: Stock Bars: Tag T2 Throttle/Clutch Lever: Stock Thumb with Duncan Racing Billet Cover/PEP Grips: Scott Nerfs: AC Propeg Bumper: Duncan 250R Grab Bar: AC Front Shocks: PEP Triple Rate ZPS Rear Shock: PEP CR500 ZPS Brake Lines: Crown Rotors F|R: Braking Rims F|R: Douglas Red Labels Tires F|R: Holeshot 20X6X10 MXR, Holeshot 18X10X8 MXR4 Body: Plastic: Stock 89 (Front & Rear), Stock 99 (Tank & Radiator) Graphics|Seat Cover: Duncan Rear Fender Decal Kit, QuadTech Seat Cover Number Backgrounds: Duncan Racing Handguards: PowerMadd Bar Pad: Tag Fuel Tank: Stock Engine|Drive System: Cylinder|Head: Duncan Racing National Porting with Duncan Racing Powerhead Bore & Stroke: Stock Displacement: 350cc Carburetor: Dual 34 Keihin Carbs with Duncan Racing Pyramid Reed Valves & Master Flow Intake Manifold Air Filter|Box: K&N with DRI Outerwear/Stock AirBox with ProDesign/Custom Carbon Fiber Air Boot Pipe|Silencer: Paul Turner Midrange Pipes & Fatboy Silencers (Triple Plate Chrome) Clutch|Plates: Hinson Billet Clutch Basket & Duncan Racing C33 Clutch Kit (7 Plate) Gearing F|R: 15/39 CDI|Killswitch: Stock Cooling: Stock 98 Radiator Other: Duncan Racing Adjustable Timing Plate, Flywheel Mod, Shift Star Mod, Duncan Racing Billet Water Pump Cover, Billet Water Pump Impeller, Duncan Racing Quick Change Clutch Cover, Duncan Racing Billet Stator Cover, Pro Design Billet Shifter, Hinson Billet Brake Pedal, White Bros. Billet Kick Starter, Cascade Billet Radiator Grill, Cascade Billet Dip Stick, Cascade Billet Rear Master Cylinder Cap, Duncan Billet Parking Brake Block Off Plate, Cascade Billet Exhaust Clamps, UPP Chain Slider Kit, Billet Front Brakeline Clamps, CR500 Linkage, ProTec Full Body Skid Plate Thanks! Quote Link to comment Share on other sites More sharing options...
jlsparky7 Posted February 9, 2009 Report Share Posted February 9, 2009 Dont see an email address but are you willing to part it out? If so email me pics of the pipes jlsparky7@hotmail.com Quote Link to comment Share on other sites More sharing options...
lilmegill727 Posted March 18, 2009 Report Share Posted March 18, 2009 just wondering, if you still have it, how much would you want for it as a rolling chassis? Quote Link to comment Share on other sites More sharing options...
Jonny B Posted March 20, 2009 Report Share Posted March 20, 2009 I would like the complete engine if you got a buyer for the roller. Let me know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.