magz Posted January 19, 2009 Report Posted January 19, 2009 (edited) Ok, so im getting my swing arm and frame powdercoated semi gloss black anyways i was ganna throw some fresh needle bearings in it so i started trying to pound the bearings out and just the inside and bearings came off leaving the outside peice. ive tried for like 2 hours now to get that damn outer peice out, its not pressed in is it?how the hell am i supposed to get that out now? also is there anywhere else i can just buy the bearings by them self's like an auto shop, im not familiar at all with finding bearings? Edited January 19, 2009 by magz Quote
Blewbyu Posted January 19, 2009 Report Posted January 19, 2009 The bearings can be a pain in the ass sometimes to get out, i throw a little grease on them when I install them. Quote
peterlocal22 Posted January 19, 2009 Report Posted January 19, 2009 i think rockey mountain has them. there a pain to get out... Quote
magz Posted January 19, 2009 Author Report Posted January 19, 2009 i think rockey mountain has them.there a pain to get out... yeah i saw those and the ones on ebay for like 40 bucks i just want the needle bearings for like 10 bucks...=\ Quote
BUILDER Posted January 19, 2009 Report Posted January 19, 2009 yeah i saw those and the ones on ebay for like 40 bucks i just want the needle bearings for like 10 bucks...=\ I posted the part numbers for those bearings a while back on here i will find the numbers again when i get home tonight. I have the numbers for the bearings from napa Quote
magz Posted January 19, 2009 Author Report Posted January 19, 2009 I posted the part numbers for those bearings a while back on here i will find the numbers again when i get home tonight. I have the numbers for the bearings from napa i found this post of yours but it was for carrier bearings, not swing arm pivot bearings "Ok here you go. The bearing number is 6007-2RJS that is a good number at napa and the seal number is 16898 that number is good at napa also o the seal number is a c/r number if they ask you. " Quote
BUILDER Posted January 19, 2009 Report Posted January 19, 2009 i found this post of yours but it was for carrier bearings, not swing arm pivot bearings "Ok here you go. The bearing number is 6007-2RJS that is a good number at napa and the seal number is 16898 that number is good at napa also o the seal number is a c/r number if they ask you. " O shit you are right. I will post the swing arm bearing numbers when i get home i have those also. Quote
magz Posted January 20, 2009 Author Report Posted January 20, 2009 O shit you are right. I will post the swing arm bearing numbers when i get home i have those also. any word on the part number for that bearing motorbuilder? Quote
J-Madd Posted January 20, 2009 Report Posted January 20, 2009 Ok, so im getting my swing arm and frame powdercoated semi gloss black anyways i was ganna throw some fresh needle bearings in it so i started trying to pound the bearings out and just the inside and bearings came off leaving the outside peice. ive tried for like 2 hours now to get that damn outer peice out, its not pressed in is it?how the hell am i supposed to get that out now? also is there anywhere else i can just buy the bearings by them self's like an auto shop, im not familiar at all with finding bearings? I used a dremel to get the outer race as thin as I could, then chisel it until it breaks. Took forever. Quote
BUILDER Posted January 20, 2009 Report Posted January 20, 2009 (edited) any word on the part number for that bearing motorbuilder? I am sorry i forgot all about it by the time i got home last night. I made myself a note and i will do it as soon as i get home tonight. Edited January 20, 2009 by motor builder Quote
BUILDER Posted January 21, 2009 Report Posted January 21, 2009 Ok here you go magz. The pivot bearing number is hk2220 that should be a good number at napa. I believe that bearing brand is ina but i dont remember for sure but that should work for you. Quote
magz Posted January 21, 2009 Author Report Posted January 21, 2009 Ok here you go magz. The pivot bearing number is hk2220 that should be a good number at napa. I believe that bearing brand is ina but i dont remember for sure but that should work for you. thanks man, ill see if i cant check those out tomorrow on the way back from droping my stuff off at the powdercoaters Quote
magz Posted January 21, 2009 Author Report Posted January 21, 2009 thanks man, ill see if i cant check those out tomorrow on the way back from droping my stuff off at the powdercoaters well, unfortunently none of those number work at my local napa auto parts or oriellys or advanced, or auto zone. So im still on a search for cheaper bearings, local stealership wants 24.00 bucks each. Quote
BUILDER Posted January 21, 2009 Report Posted January 21, 2009 well, unfortunently none of those number work at my local napa auto parts or oriellys or advanced, or auto zone. So im still on a search for cheaper bearings, local stealership wants 24.00 bucks each. I will call napa right now and figure out what the problem is just give me a few. Quote
BUILDER Posted January 21, 2009 Report Posted January 21, 2009 I will call napa right now and figure out what the problem is just give me a few. Ok magz here is the deal. I called napa and they oreded those bearings for me from Mcquire bearing and that is a good number through a bearing house thats why napa could not find it for you. So if you can go to any bearing house or have napa call a bearing house for you it will work. I also ask him how much they were and my cost on them after he buys them from the bearing house was 9.99 each so they are cheap. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.