rajaa11 Posted January 4, 2009 Report Posted January 4, 2009 Hello all, I'm going to be changing my carbs setup over from a 2 to 1, to dual 28mm carbs and was wondering what kind of jetting people are running with this setup. Bored .40 over V force 3 carbon fiber reeds +4 timing Toomey T5 and silencers 40:1 pre mix about 40' above sea level (I think, I'm in FL) dual 28mm carbs with K&N Pods MX port and polished Trinity racing stage IV head with 20cc dooms Main jet size, Pilot jet, needle position 1st, 2nd, 3rd, 4th slot etc..., air/fuel screw turns, etc.... Thanks Quote
rajaa11 Posted January 4, 2009 Author Report Posted January 4, 2009 what brand of 28mm carbs? 28mm Mikuni rounds, I didn't think it matter......sorry Quote
Snopczynski Posted January 4, 2009 Report Posted January 4, 2009 28mm Mikuni rounds, I didn't think it matter......sorry Keihin carbs take different jets than mikunis. Are they mikuni vm's? Quote
rajaa11 Posted January 4, 2009 Author Report Posted January 4, 2009 Keihin carbs take different jets than mikunis. Are they mikuni vm's? I think so here's a pic Quote
Snopczynski Posted January 5, 2009 Report Posted January 5, 2009 Ummmmm, are you sure those aren't stock carbs? They even have the choke balance tubes. Quote
kawiking Posted January 5, 2009 Report Posted January 5, 2009 do u have a better pic of ur carbs ? Quote
rajaa11 Posted January 6, 2009 Author Report Posted January 6, 2009 do u have a better pic of ur carbs ? No I don't, my camera sucks, what is it you are looking for? There is no numbers on them, all they say is Mikuni. There is a 300 main jet in there and needle clip is on the 3rd slot. I just pick these up a day or so ago. Quote
wacko2000 Posted January 6, 2009 Report Posted January 6, 2009 Those look exactly like stock banshee carbs. 26mm You can have them bored out to a 27.5 which will help out the performance alittle aswell.. Someone lied and told you they where after market carbs? Quote
lilmegill727 Posted January 6, 2009 Report Posted January 6, 2009 yep those sure do look exactly like stockers. doesnt mikuni make banshee's carbs? i hope you didnt buy those and someone told you there 28mm cause as of what we can see... there stock 26's Quote
rajaa11 Posted January 6, 2009 Author Report Posted January 6, 2009 (edited) An't that a kick in the nutz, I'm going to put my foot in someone's ass. I got them cheap Edited January 6, 2009 by rajaa11 Quote
GrMeyer Posted January 6, 2009 Report Posted January 6, 2009 Yup them are stockers from what i can see. I just got done rebuilding mine last weekend. If you have a micrometer you can mic the inside of the carbs. That is the ture way of seeing before you get your foot all dirty Quote
rajaa11 Posted January 6, 2009 Author Report Posted January 6, 2009 Yup them are stockers from what i can see. I just got done rebuilding mine last weekend. If you have a micrometer you can mic the inside of the carbs. That is the ture way of seeing before you get your foot all dirty I just mic the inside of the carbs and they are 28mm, I will take some pic's of the micing when I get home...... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.