2 INTO 1 JETTING

[clinton588]

Ok, so a friend of mine has a 2 into 1 set up that needs to be jetted. I'm not use to this set up, so if anyone can help with a good starting point that would help.

 

34mm PJ Kehin

Trintey 2 into 1

Stock air box w/ K & N

T5 pipes

Fast dune port

230 lb rider

Elv. 1900'

75 deg f

19cc domes

V3 reeds

[Snopczynski]

Do a search its on here.

[ws6]

that's a forever asked question,use the search it's definitly in there

[bansheesickness]

for 1 the pj's are hard to get the jeting just right, i would also suggest a 35 pwk which is what i was told to run when i bought mine. i got two shees with the 2 into 1 set up.

 

my shee........cub.. 38 pwk, 58 pilot, 215 main, eej needel, pt mids 18 cc domes, v force 3, 110 fuel

 

my wifes shee.....stock bore, dune-hillshot hjr port job, 35 pwk, 50 pilot, 210 main dek needel, pt mids. 18 cc domes, v force 3 110 fuel

 

this is at sea level and both run very good

[clinton588]

for 1 the pj's are hard to get the jeting just right, i would also suggest a 35 pwk which is what i was told to run when i bought mine. i got two shees with the 2 into 1 set up.

 

my shee........cub.. 38 pwk, 58 pilot, 215 main, eej needel, pt mids 18 cc domes, v force 3, 110 fuel

 

my wifes shee.....stock bore, dune-hillshot hjr port job, 35 pwk, 50 pilot, 210 main dek needel, pt mids. 18 cc domes, v force 3 110 fuel

 

this is at sea level and both run very good

 

Thanks, I'm trying to get him to get a 35 PWK. He just don't have the money. And the PJ's are a pain in the ass to get set up. I think he is just going to have to fork out the money.

THANKS.