travis6767 Posted November 19, 2008 Report Posted November 19, 2008 can you guys explain to me what toomey needles look like I bought some carbs and they have some weird needles in them they are about 1/4 inch longer than stock and have 6 grooves for the clip to sit in Quote
dajogejr Posted November 19, 2008 Report Posted November 19, 2008 (edited) can you guys explain to me what toomey needles look like I bought some carbs and they have some weird needles in them they are about 1/4 inch longer than stock and have 6 grooves for the clip to sit in Toomey needles are made by DynoJet. So, it's either a Toomey/jet needle (they are longer and have 6 grooves instead of the stock 5) or a Vitos. To my knowledge, a Vito's needle is red. I could be wrong there. You definately have an aftermarket needle. It is supposed to be richer in the middle... EDIT apparently...my memory isn't so bad. http://www.vitosperformance.com/atv_parts/...=197&page=1 Edited November 19, 2008 by dajogejr Quote
travis6767 Posted November 19, 2008 Author Report Posted November 19, 2008 ok thanks i hope this is my problem, it cuts out at mid throttle, i think i will try the stock needles and put them on the middle clip and see how shee runs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.