r32wa Posted November 6, 2008 Report Share Posted November 6, 2008 Will a RZ350 stator and flywheel work on a banshee? If so what mods are needed? While fitting my adjustable timing plate I found everything was full of rust which in turn destroyed the puller and flywheel and stator. Im trying to go riding tomorrow and cant find any banshee bits but found plenty of RZ stuff. Any help ids greatly appreciated. Quote Link to comment Share on other sites More sharing options...
4stroker Posted November 6, 2008 Report Share Posted November 6, 2008 you will need the RZ CDI and harness too, then it will work. i think you may also need the RZ reg/rectifier. your from oz yeah? you should have asked on ozatv mate theres a few of us playin with these now! Quote Link to comment Share on other sites More sharing options...
r32wa Posted November 6, 2008 Author Report Share Posted November 6, 2008 So its not as easy as swapping the plugs and bolting on the RZ stator and flywheel? If I have to use the RZ CDI box, what else would I have to change? Quote Link to comment Share on other sites More sharing options...
stageIVbanshee Posted November 8, 2008 Report Share Posted November 8, 2008 why would you have to change everything? the motors should be the exact the same. but if he says so than dont do it. i have no expirience with the rz's Quote Link to comment Share on other sites More sharing options...
r32wa Posted November 8, 2008 Author Report Share Posted November 8, 2008 Got it sorted, the RZ stator wont work on its own, it has about 20 wires coming out of it where the banshee has 4. the flywheel will work, the pick ups on the outside are slightly longer which will affect the timing, advanced or retard I dont know, pure dumb luck let my banshee flywheel survive and managed to repair the stator. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.