RZ Stator and flywheel

[r32wa]

Will a RZ350 stator and flywheel work on a banshee? If so what mods are needed?

While fitting my adjustable timing plate I found everything was full of rust which in turn destroyed the puller and flywheel and stator.

Im trying to go riding tomorrow and cant find any banshee bits but found plenty of RZ stuff.

Any help ids greatly appreciated.

[4stroker]

you will need the RZ CDI and harness too, then it will work. i think you may also need the RZ reg/rectifier.

 

your from oz yeah? you should have asked on ozatv mate theres a few of us playin with these now!

[r32wa]

So its not as easy as swapping the plugs and bolting on the RZ stator and flywheel?

If I have to use the RZ CDI box, what else would I have to change?

[stageIVbanshee]

why would you have to change everything? the motors should be the exact the same. but if he says so than dont do it. i have no expirience with the rz's

[r32wa]

Got it sorted, the RZ stator wont work on its own, it has about 20 wires coming out of it where the banshee has 4.

the flywheel will work, the pick ups on the outside are slightly longer which will affect the timing, advanced or retard I dont know, pure dumb luck let my banshee flywheel survive and managed to repair the stator.