4mill 421 cub build, need some help and advice..

[b-nasty]

New to the banshee world. Been riding and building for a while now. Just picked up a 1997 banshee for pretty cheap and now im tearing it down. Got a 4mill longrod and some chettah cub cylinders for it. The cylinders are setup for a 4mill so i dont need to run a spacer plate? What kind of head should i run and what size domes for best performance. What size carbs should I run. Any other incite would be appreciated. thanks

[Dave I.]

if they are setup for 4mil crank you dont need a spacer

 

Noss Machine makes a nice head, and he can get you domes also....Dome size depends on your elevation

 

Carbs.....35-39mm will work, depends on what kind of riding you do

[Handyman]

New to the banshee world. Been riding and building for a while now. Just picked up a 1997 banshee for pretty cheap and now im tearing it down. Got a 4mill longrod and some chettah cub cylinders for it. The cylinders are setup for a 4mill so i dont need to run a spacer plate? What kind of head should i run and what size domes for best performance. What size carbs should I run. Any other incite would be appreciated. thanks

 

Welcome to the site.... Boy there is a wide variety of heads to use and carbs as well...The one question everyone will ask is..What type of riding do you plan on doing?? The variations of carbs and heads is pretty wide? There are coolheads, stock heads, etc, and there are a good variety of carbs as well.....Good l uck on the build and post some pics when you can

[b-nasty]

The bike is going to be a straight drag bike. Located in Omaha,Ne dont know what elevation is.

[shanYE west]

Gonna need a good set of pipes.. Hate to add a plug for my sale but.. I got a brand new set of shearer pipes that would work great on it if your interested.

[dragbanshee]

Hate to add a plug for my sale but..

 

Good guy right there!