05.Banshee.SE Posted October 5, 2008 Report Posted October 5, 2008 Cheapest? I would not port if that's your decision factor. Wait til you have the money, and have Herr Jugs or someone comparable do it. This is your Banshee dude, not some piece of shit 400EX!! Quote
bansheejoel Posted October 6, 2008 Report Posted October 6, 2008 click on the link in my sig. {You will not be disappointed} damn i looked on there site $250 for a aggressive dune port? thats pretty damn cheap Quote
bansh03 Posted October 6, 2008 Report Posted October 6, 2008 damn i looked on there site $250 for a aggressive dune port? thats pretty damn cheap That's what I have (Haul's ass too). top notch customer sevice to boot :biggrin: Quote
klemet banshee Posted October 6, 2008 Author Report Posted October 6, 2008 Thanks alot guys! i appricaite all the responses i am going to to save all the money i get and get an aggressive trail port and get my head shaved Quote
bansee fever Posted October 7, 2008 Report Posted October 7, 2008 Thanks alot guys! i appricaite all the responses i am going to to save all the money i get and get an aggressive trail port and get my head shaved BUMP FOR RB RACING ya you wont be dissappointed with Robs work he did my stock cylinders and i was more than happy! he is porting my sons blaster cyl right now! he dose top noch work at a great price!!! Dunedog Quote
dirtfreak Posted October 7, 2008 Report Posted October 7, 2008 could you help me out guys? im looking to spend like 170 for both the one guy told me it would be like 250 per cyclinder hey guy rbracing 225.00 for both cylinders and 65.00 to shave and re chamber your head. jeffery riddle at sand master chassis 250.00 for both cylinders and about the same thing for the head work. either one is reasonable and do good work for the money.you will notice a big difference.for that money about a 15 to 20 hp increase.you can get alot more power for more money parts etc. but you was asking for cheap.anything cheaper than these prices it will probably run worse. Quote
dajogejr Posted October 7, 2008 Report Posted October 7, 2008 BUMP FOR RB RACING ya you wont be dissappointed with Robs work he did my stock cylinders and i was more than happy! he is porting my sons blaster cyl right now! he dose top noch work at a great price!!! Dunedog Is this RB Porting out of Laingsburg, MI? If so...I agree. Bob does nice work, I've ridden a motor done by him for a friend that lives in Canada...it was a stout little motor!! Quote
bansh03 Posted October 7, 2008 Report Posted October 7, 2008 Is this RB Porting out of Laingsburg, MI? If so...I agree. Bob does nice work, I've ridden a motor done by him for a friend that lives in Canada...it was a stout little motor!! Dajogejr: Yes, same place. Bob is the man and builds some mean motors. Hell of a nice gut too! Quote
mofoka Posted October 7, 2008 Report Posted October 7, 2008 I'll do it cheapest. You pay to send it here and back. I'll do a shit job I promise and more than likely you'll end up crying because I'd put holes in the water jacket. Not on purpose but because I think you will probably get what you pay for. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.