SHEE ELECTRICAL PROBLEM! PLEASE HELP!

[KANEBANSHEE]

OK SO I AM KIND OF NEW TO BANSHEE'S, ONLY HAD MINE FOR A FEW MONTHS NOW AND HAVE BEEN ON THIS SITE CONSTANTLY TO TROUBLESHOOT AND FIX AND GET SOME WORDS OF WISDOM FROM ALL YOU FOLKS. SO THANKS FOR ALL OF THAT

 

BUT I HAVE LOOKED FOR THE PAST FEW DAYS TO SEE IF ANYONE HAD ANYTHING SIMILAR AND I CANT FIND ANYTHING SO HERE IT GOES:

 

ITS A 96 SHEE ALMOST BONE STOCK (FEW UPGRADES HERE AND THERE)

 

DIED ON ME ONE DAY TOOK ALL APART FOUND THE RIGHT SIDE HEADLIGHT WIRES FRIED AGAINST THE HEADER PIPE MELETED THEM ALL TOGETHER.

 

SO I AM ASSUMING THAT ALL THE WIRES RUN IN CIRCUIT AND I DO HAVE THE MANUAL (COURTESY OF WHOEVER POSTED THE FREE PDF FILE) THAT WOULD EXPLAIN WHY I DIDNT HAVE ANY SPARK.

 

FIXED ALL THE WIRES RE-SOILDERED(SP) AND HEAT SHRINK BUT ALL BACK TOGETHER EXPECTING TO GET SPARK AT THE PLUGS AND NOTHING....HAVE RAN THROUGH ALMOST ALL OF THE TROUBLESHOOTING STEPS IN MANUAL (TORS DISCONNECT, CHECKING WIRE ENDS/CONNECTIONS BLAH BLAH) DONT HAVE AND OHM METER THAT CAN READ IN A WIDE ENOUGH SCALE TO CHECK COIL AND STATOR AND $HIT.

 

I GUESS WHAT I AM ASKING DOES ANYTHING THINK THAT MELTING ALL THOSE WIRES TOGETHER HAS BURNT OUT MY STATOR AND OR COIL? AND IF SO I WILL BE LOOKING FOR EITHER OR I AM PICKING UP A GOOD OHM METER TODAY TO CHECK ALL BUT SEEING IF YOU GUYS HAVE ANY FIRST HAND KNOWLEDGE BEFORE I CRACK INTO IT!!

 

THANKS ALOT GUYS LET ME KNOW WHAT YOUR THINKING!!

[shee4speed]

I'mm thinking its possible that you could have fried a cdi.Not sure though.Also someone is going to come on here and jump your ass if you don't lose the CAPS.Good luck with the ohmeter.

[KANEBANSHEE]

SORRY WORK IN RADIO AND ALL TRAFFIC SYSTEMS AND A/R SYSTEMS MUST USE ALL CAPS AND SINCE I AM BACK AND FORTH FROM THOSE TO THIS IT IS JUST A HABBIT. THANKS FOR THE INPUT THE CDI WAS A THOUGHT OF MINE BUT I AM JUST TRYING TO SEE IF ANYONE HAS MELTED WIRES DOWN AND WHAT IT MESSED UP FOR THEM. THANKS

[KANEBANSHEE]

PROBLEM SOLVED! BAD CONNECTORS!!