Starting place

[wayfast1500]

Hey guys Im new here. Just picked up a '90 shee with fmf fatties and power core 2's. I just ordered some clamp on pod filters, and the bike has a rebuilt engine. It has the stock carbs, and other than the exhaust and pods seems to be stock. Im in New Hampshire so roughly sea level what would be a good place to start as far as clip position, mains and pilot jets. How many turns out with the air screw with my setup? I know I'm going to have to do some plug chops to get it dead on but I just dont know how these like to run and need a good base to get started. Thank you in advance.

[dragbanshee]

Hey guys Im new here. Just picked up a '90 shee with fmf fatties and power core 2's. I just ordered some clamp on pod filters, and the bike has a rebuilt engine. It has the stock carbs, and other than the exhaust and pods seems to be stock. Im in New Hampshire so roughly sea level what would be a good place to start as far as clip position, mains and pilot jets. How many turns out with the air screw with my setup? I know I'm going to have to do some plug chops to get it dead on but I just dont know how these like to run and need a good base to get started. Thank you in advance.

With the pods on there Id prolly start with 300-310 mains keep stock pilots 25s, clip on the middle groove and air screw 1 1/2 out