Search the Community
Showing results for tags 'wont start'.
Found 4 results
Banshee won't start
4est138 posted a topic in Banshee Repairs and ModsI recently tore down my banshee. It had a shifting problem and I fixed the problem with no troubles. Put it all back together, put brand new gaskets and seals on everything and torqued everything to specs. It seems like a fuel issue. The banshee is getting plenty of power to the plugs but they come out dry every time. I'm getting fuel to my carbs because it drains out of the settling bowl after I kick it a few times. It ran right when I took it apart. It almost seems like the reeds aren't opening for some reason. Any suggestions would be much appreciated. Thanks
banshee issues with exhaust
WheelieDee posted a topic in Banshee Repairs and Modsokay on my 99 banshee, was running real strong till it fell over on its side on cement. continued to run strong for another 30 mins. then issues came from the exhaust it started smoking all white smoke out of one pipe only. turned it off and parked it. took the spark plugs out checked them, looked fine. problem is the banshee will not start back up so i can't really diagnose the problem. does anybody know where this could come from?
Tors eliminated but won't start
WheelieDee posted a topic in Banshee Repairs and Modsokay so i started my banshee the day before ran in idle smooth. next day i installed my eliminator kit & my boyesen dual power reeds on my stock reed cage. i followed all the proper instructions, filed down the left&right carb outside for my new idle screw.. even removed the black tors computer on the frame the day before i completely removed my tors and like i said my banshee ran smooth during idle. took off the tors cable that runs from the throttle, sealed it, unplugged all the extra cables. synced the carbs the slides are equal. put my k&n pods on and tried to kick start it, no start.. i thought it could be the reeds so i took them out and loosened the screws so the pedals could be a little more looser still no start. can somebody help me find the problem? 565ft above water, and i ride on the streets(outlaw)
Starts on warm , doesn't on cold.
Spiner posted a topic in Banshee Repairs and ModsGot my banshee out yesterday and tried to start it , wouldn't start at all so I push started it , ran perfect.When I turned the engine off to put fuel and wash my glasses out I thought it won't start , but it started like it used to do(engine was still warm). Today it wouldn't start on cold engine , push started it and runs perfect , starts on warm engine no problem. One of my spark plug wires is broken but I put it back into place and secured it. Also when I turn the choke on the quad slowly dies , the rev's go down until it bogs down? Any help? Will be very grateful for help.