Search the Community
Showing results for tags 'stockcarbs'.
Found 1 result
Quick and simple as possible can't find a post that has the answer I'm looking for! I can't get the bike to idle RIGHT what so ever and have tried everything I can possibly think of and am I out of ideas I'll try to be as detailed as possible. Mods Fresh, stock cylinder 4mill dune port HJR t5 pipes Cool head domes cut for 91oct sea level +4 timing stock carbs, none of tors crap, crossover tube , k&n pods with outter wears, vforce 4, current jetting 30pilots Needle One above middle clip 330 mains So mid and top are great plug chops show it too, but I've never been able to get the idle right, when it's cold it start 1-2 kick right up no choke and then it warms up and acts rich, Boggs and has to clear up before it revs up. It will idle for a minute or 2 then die every time! I've tried going down to 27.5 and 25 and somehow does the same shit, when I open and close air screws I don't notice a difference, slides are in the right way choke tube is there, sync carbs, I've leak tested and no leaks, reeds are new less than 3 months on them, I tried turning the idle screws in all the way and helped a little bit but still not right , and carb body is shaved as low as could for the same reason that It wouldn't stay idling, I've even checked the pick up gap on the fly wheels and it's good. The last things I've done is full tear apart the carbs to clean and nothing float is set 21mm any help is much appreciated!