Search the Community
Showing results for tags 'no spark'.
-
What's up guys.. I'm reaching out to hopefully get some help from you guys... I have a 2002 Banshee and bought it without headlights or a taillight. I purchased a grab bar with a built in LED tail light and put it on. When I installed it and the bike was running and as soon as I connected the wires, the bike shut off. I am yet to be able to get it to start up again. There is no spark. I changed the spark plugs, coil pack, CDI box, kill switch, and even bought a new wiring harness and have not been able to fire it up. I watched a youtube video to test the stator and out of the three coils, one of them reads too high. Ignition coil is within tolerance, pickup coil is within tolerance, but the lighting coil reads .8 when it should read 0.26 - 0.38 ohms. Can this be the reason for no spark? Is there a way to remedy this issue or do I have to buy a new stator? I'd appreciate any help or suggestions. Thanks.
-
Hello all, new here to the Banshee community and I'm in need of a bit of assistance, hoping somebody much more well-versed than I is able to chime in. I acquired a (basically) junk 1987 Banshee at a bargain price, although it's in very, very rough shape. I decided to completely strip it down to the frame and redo everything, including completely rebuilding the engine from the bottom up. Is this even possible? I don't have much experience with vehicle wiring, or wiring in general, but I'm not stupid either. I bought the Clymer manual and have studied the wiring diagram extensively. After gutting the wiring harness I have already found multiple cut wires/broken connections, so I'm glad I'm re-doing the wiring completely because it probably wouldn't have spark the way it was. The current harness is a hacked up mess, so I'm planning on removing most of the wires that aren't needed, such as TORS, throttle sensor, parking brake sensor and key ignitiion. I would still like to keep the headlights if at all possible, and my idea was to connect the headlights to the kill switch so that they're always on whenever the bike is running. I would get rid of the Off/Lo/Hi switch. Oh and one more question... If you just start cutting wires /not plugging them into the CDI connector tabs, does it effect the functionality of the CDI at all? Does the CDI need to sense a complete "circuit" (every wire on bike either grounded, or connected somehow,) or are every two wires independent of all other two wire pairs? I found a wiring diagram online that seems to represent what I am trying to do with my bike. I've attached it below. Thanks for all the help.
- 5 replies
-
- wiring harness
- electrkical
-
(and 5 more)
Tagged with:
-
hey everyone, Im new to this site and i was wondering is somebody out there has some usefull info for me. last year i bought a banshee from a friend that had major gear box problems for very cheap. The motor ran strong tho... started first or second kick every time. Instead of ripping the engine apart and fixing the bad gears in the trans, i decided to buy an engine off of a reputable seller on ebay. as soon as i got it, i slapped it right in. went to start it, and she didnt want to go. hit it with some starter fluid and it started but ran really rough and wouldnt hold an idle. after a little bit it died and wouldnt start again. took the plugs out and no spark. i replaced the stator, wiring harness (OEM one was hacked to peices), flywheel, woodruff key, kill switch cluster, BR8ES plugs, ignition coil, key delete (twisted the white and red wires), One of the connectors that was coming out of the CDI had been melted (housed the orange ignition wire) i was able to check all of my new parts except the CDI. i bought a cheap $60 one off ebay (probaly not the right choice). Not sure if they sold me a junk CDI or im missing something here. oh and TORS had been deleted since i got it. deleted off carbs and no black box on the frame. i believe the voltage regulator had nothing to do with ignition so i left that alone. If anyone can provide me with any info that would be great! -wrxguy97
-
I Have a 2002 Banshee .20 Over, 35 mm carbs, Stage IV Cool Head, Dmc 916's, Ect... I Was Riding at 40 mph and the bike just died. I tried restarting with no luck Kick & Roll. It sounds like it's just pushing gas. I Checked Plug and it's wet but no spark.. Changed coil, cdi and Gas. Still No Spark Does anyone have Woodruff key installation instructions?
- 13 replies
-
- No Spark
- Woodruff key
-
(and 2 more)
Tagged with:
-
Just picked up a new bike ,threw a few new parts on it (nothing electrical ) , new fluids , and kicked it over with one of the plugs out and it doesn't spark , the key was removed by the person befor me and replaced with one of those tether things . I don't kno much about electrical so was looking for some troubleshooting help from some banshee lovers like myself . Can post pictures if needed i think idk because this is my first posting , thanks in advance !