mxbanshee5

last one.

some more,

I have for sale: YFZ headlights, rear brake light 250R fatty pipe, gas tank Banshee gas tank (no petcock), stock crossover, stock intake boots, White Bros. boost bottle, Front brake calipers (no pads or restaining clips, rear brake master cylinder, headlights, rear brake lever, shifter lever, radiator (no clue of condition), steering stem block, Stock swingarm pivot bolt, and also a set of stock carbs w/ cable and TORS(bad shape but could be used for parts). And last a set of PTR hi-rev pipes (chrome). I would consider trading w/ some mic. stuff. What I need are the lower a-arm pins and lower arm nuts and bolts.

What about buying my grabbar. I'm no deadbeat, its just most of the time, I'm not too sure if I'm willing to sell things I might use in the future. But now I'm sure I want to sell my Grab bar because I got two of them. I'll even post a pic to make sure I have one.

I've also got a set of stock intakes w/ a white brothers boost bottle. A set of stock carbs that could be used for parts. Rear grab bar. Rear brake res. w/ brake line and lever. I also have a 86 250r FMF Fatty pipe w/ silencer for sale.

I'm not too sure.. my main goal was to trade for set of pipes or any other parts. If you really want them, make an offer, and I might consider.

I have for sale: F/R race cut fenders (white, just painted black) Headlights (white, 1 is crack) PTR pipes (considering trading for another set, prefer motofast or dynoports) Seat pan Stock gas tank (no petcock) Stock swingarm pivot bolt

I want to trade my chrome PTR's for a DynoPort 2into1 exhaust. I just have the pipes, no fatboys. The pipes are in pretty bad shape: left side has a broken tab which was welded back on and the right is starting to crack but that is all. Some rust overall is still in good shape. If interested send a PM.

I have for sale: YFZ450 shocks-Make and offer Banshee cut plastics(front and rear)- 80 OBO. DG steel nerfs for banshee(pretty beat up)- 30 stock banshee seat pan (good condition)-25 stock banshee grab bar- 20 WILL POST MORE LATER W/ PICS ALSO.

I looking to buy a bottom end for my 87 lt250. tranny must be good. Crank doesn't. Willing to buy for 100.. Or A running motor from an old dirt bike w/ wiring. will pay 100. Any kind of motor.

Can someone tell me why my stator went out on my blaster. I was told to replace to replace the ignition stator part of the stator and so I did. I had a hard time starting it and when I get it started it completely shuts off. Then when I check for a spark and non. Can someone please give an answer.

my mods are ptr mid pipes, GP 2to1 carb setup, 50 over wiseco prolites, milled head, stock reeds, k&n filter. THe jetting is dead on to where its not too lean or not to rich. I check the plugs and they are brown. And still, it sound slow. I've also here it was the cdi, thats why they sell different ones for 87-89 and 90-04

Can anyone tell me why my 87 banshee sounds like it runs alittle slower. Like when I set it aside a late model banshee it seems to run alot more faster, more poppy, and mines sound alot less poppy. Even when I got it rebuilt it still sounded slow. Can anyone please tell me whats wrong with my ride.

I want to get rid of these exhaust system. The pipes have cracks where the tabs are and one also had to be rewelded back on. the fatboys are in terrible shape, the cores on both seem to be broken and there are some cracks on the tabs also. By the way the pipes are chrome plated w/ some rust on them. I would like to trade them for any kind of exhaust system except for a stock. I would prefer a 2 into 1 exhaust. PM me if interested.

Im looking for an 87 lt250r bottom end. I need the cases, tranny, crank, stator, and gears. Please pm or email me back.

I have a set of front max pros, 20" tall tires. 80% for 40 plus shipping.

how bout 35 for them. If you think that's a weird size, my rears are 18-9.5-10. and they are also fast trekkers.

I have for sale: BANSHEE PARTS stock carbs stock intake boots White Bros. boost bottle gas tank w/o pit cock stock head front brake res w/ hard lines rear brake res w/ line stock clutch perch white label douglas front rims(very thick stuff but ding alittle) Blaster axle w/o nuts or clip stock bearing carrier w/o bearings Lt250r blue label front rims trx250r fmf pipe and silencer stock steering stem stock front arms stock blue gas tank w/ pitcock ported cylinder needs resleeve(crack) milled stock head stock blue hood stock front rims w/ stock radials 85% stock shrouds Maybe willing to trade some parts for an 87 lt250r bottom end. send a pm if interested. may send pics

I have a stock tank w/o the pit cock, both complete stock carbs w/ intake boots and the boost bottle to go with it, and I also got the motor mounts with it too. the only problem is the throttle cable is beat up, and needs to be replaced, and it comes with no jets. So send a pm it your interested. I'll see if I can get pics.

I just got my graydon 2to1 about 4 weeks ago, and all I have to say is I the best set up I ever bought for my shee and the PT midrange pipes I bought a month before I got the 2to1 setup.