mxbanshee5

hey there, I'm looking for some parts for my project build. Anyone who is selling any aftermarket goodies please post them here. It maybe something I am interest in buying. The main things I'm after are: trinity or graydon proline 2into1 carb kit, motofast 2into1 exhuast (nickel plated), Vforce reed valves, Coolhead w/ 20cc domes. Or if you have any other goodies, such as suspension, or acessoriesl, etc.. please reply back or email me at [email protected] . I've been trying to get my project going for about a year, but I just been getting sidetrack most of the time. So please help me out.

I posted up my axle for auction for 200.00 on ebay. It's a great buy, it comes w/ free shipping.

the axle should fit every year banshee. Sorry tho the axle was sold.

YFZ50 shocks-200 plus shipping great condition Lonestar axcalibur axle-150 plus shipping few chips in chrome but should last a life time. polished front/rear brake calipers w/ some blue sprayed on-75obo plushipping. polished YFz upper arms, and lowers is wanted-75 plus shipping, lower left arm is bent. new banshee seat foam w/ seat pan-50 plus shipping THese are just some of the major parts I'm selling. I have many other misc. parts as well, and even motor parts aswell. And for the pics, I'm sorry. If none of these parts sell, I will be posting them up on ebay for alittle more than my asking price. AND PLEASE, DON'T ASK FOR PICS, I DON'T HAVE ANY.

I have for sale, a set of intake boots good condition, and it also comes w/ a White Brothers polished boost bottle. I'm trying to get atleast 30 shipped. I'm also selling other parts as well, send a pm, I may have what you're looking for. I do accept Paypal as a quick and safe payment.

I'm need some parts to get my project going again. Blaster rear hubs or banshee. Pro pegs (stock location or lowered) A set of used cylinders A pairof 8x8 rims Dynoport 2n1 exhaust 2n1 carb setup or just a set of aftermarket carbs will do. These are just some of the parts I need to get my project going. If anyone has any of these parts please send pm,and maybe will work out some sort of arragement.

damn, 50-75 for boring. where do you get you pistons from also 130-150? I pay a100 for boring and atleast 200 for a wiseco topend. I'm thinking I'm paying to much for my stuff.

I also agree w/ Pap. The stop tab on the bottom of the frame is probably bent. Same problem occured on my shee as well. This will always be a problem w/ banshees. To keep this from happening you will have to reinforce the tab by weldingl some sort of gusset on the back side to the tab.

I'm selling those crappy lights I have, also still come with the madeyes. May have seen them on past posts. white shells.melted grilles, 1cracked housing, damaged trim, and still work. Send a pm if interested.

I have for sale for a banshee: Stock Beater headlights. (still works) I'll go 15 plus s+h. Stock radiator(pretty beat up, don't know if leaks) 15 plus s+h. Stock 89-05 banshee rear sprocket hub(good condition) 10 plus s+h. Stock 87-89 spark plug coil(works) 10 plus s+h. Stock 87-89 Front calipers( not sure if works, needs pad retainer clips) 15 plus s+h. stock 87 front brake resevior(still works, Polished lever) 10 plus s+h 87 rad/gas tank cover(red)has minor scratches and white spots, was clear coated. 15 plus s+h 3 plastic radiator grilles still good.5 bucks ea. + shipping stock 89 rear brake rezzy w/ master cylinder(not sure if works) 15+ shipping. rear brake lever 5+ shipping stock plastic seat pan w/ seat latch. 10+ shipping Set of 5/8" reed spacers (good condition, no bolts) 20+ shipping stock timing plate(good condition, no mods) 10 + shipping stock gas tank(has a screw stuck in in, no pitcock) 10 + shipping Stock swingarm pivot bolt (good condition) 10 + shipping BLASTER PARTS: Stock Axle 20+shipping (good condition) Stock bearing carrier 10 + shipping (good condition, does not come with brake mount, and no bearings. Stock brake rotor 10 + shipping YFZ 450 PARTS: Stock headlights(excellent condition, do work) 40 + shipping obo. stock brake light(good condiition, does work, doesn't come w/ brackets) 15+shipping stock front bumper(not bent, some chips) 10 + shipping stock healgaurds(just the plastic, no brackets) 10 + shipping stock axle (bent on left side, wabbles alittle) 15+ shipping TRX300EX Stock 97 a arms 50 + shipping obo Stock tie rods( no ends) 15 + shipping obo TRX250R 86' FMF FATTY PIPE w/ Silencer 100 + shipping obo stock (blue) hood (minor scratches) 15 + shipping Stock (blue) gas tank (pretty faded, doesn't come w/ pitcock) 20 + shipping STock front bumper (painted white, w/ some chips, but straight) 10 + shipping LT250R 87' FMF Gold Series pipe w/ silencer 100 + shipping (few hours on it had it for a couple of years, bike was down so decided to sell it) Stock completely new topend, (resleeved, pro x piston and gaskets) Was put on the motor but was never turned on. 200 + shipping (COMPLETELY BRAND NEW AND THE CYLINDER HAS BEEN POLISHED) I'm parting out the whole motor. can say is the cases are junk, the stator is went out, and the counterbalancer bearings went out. everything else is still good. I also may have a set of front works, not sure if going to sell though. I'm also selling the wiring and all electricals. PLEASE IF YOU HAVE ANY QUESTIONS ABOUT ANY OF THESE PARTS, PLEASE SEND A PM. I ALSO TAKE PAYPAL AS PAYMENT, OR MONEY ORDER.

last one.

another

another pic.

For sale is a set of stock banshee lights. the condition of these lights are pretty bad. The housing on one of them is cracked and both grilles are melted in the center. Also on one of them, the main tab that holds the light to the housing has broken off. So I used the mad eyes covers to hold them together, they also come with the lights as well. The amazing thing is, that they both work. PM me for an offer.

What the HELL!!!! Forget you guys.

I posted my lights up on ebay, and if anyone likes to bid on them, goodluck. And if you think its to high, . If your a Bansheehq member and if you buy it now, I'll give free shipping. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...4519438976&rd=1

Hi, I'm looking for a 2000 blue gas tank cover and Rad cover. I have only 35 bucks to spend, can someone please help a brotha out. or I will consider trading with a pair of white headlights which do work, but one has a crack housing which was slightly fixed w/ some epoxy and also a crack grill. Also they both have melt grilles on the center of both of them. They both come w/ mad eyes covers which are black/red colored. So if anyone wants to consider trading send a pm.

For the ultimate hook up. You should go w/ the -2 swingy, w/ grooved turfs, and most certainly a smaller rear sprocket. Lonestar makes a rear sprocket hub that would accomadate a 250r sprocket which uses less teeth than a banshee. This will help higher the gear ratio, which will make every gear seem not so short. It'll even help w/ less tire spin. And I've seen it work on many of the pro's who race banshee's.

I sold about 2 days ago, but the guy hasn't sent no payment or hasn't even replied back. I just thinking about pulling the plug on him.

Yes, I'm looking for the Sleeves, but they are actually called pins. I just need the 4 lower "Sleeves" if you have em'.

I posted on ebay today, my 2into1 carb kit. Please bid on it. Or buy it now for 150.

I'm looking for the pins for the lower arms. I need all 4. I know there someone with a couple lying around in the shop. I really need em' to finish up my project banshee frontend.

here are the rear brakes.

I also have a set of aluminum reed spacers for sale. they don't come with the intake screws. Selling for $20 shipped.