bump, buy my parts people
The carbs, intake boots, front brake lever, exhaust clamp and hangers, front rims and tires and swingarm chain guide have been sold.
I would like COD4, Condemed, Pure, NFS Most Wanted, COD5, Perfect Dark Zero, Bad Company, and also, do you have any extra controllers and headsets?
Thanks
I just measured the stroke and it is 58mm which is a 4mil stroker.
If anyone wants to buy a 421 engine for a good price here is your chance buy hurry before people start buy things off the engine.
Ok here are some prices
cub 68mm w/ pistons - $650 + shipping
carb 35mm PWK with billet intakes - $300 + shipping
FMF SST pipes - $300 + shipping
Vito's Hemi Head - $100 + shipping
Stock Shocks front and back - $75 + shipping
Front spindle w/ hub - $50 + shipping for each side
Rear hubs - $30 + shipping
If you want prices for something else, just ask. I am open on my prices.
Thanks
The plastic is black and red, the front have been cut and they are not the best looking but are not destoryed, I will post up some pictures tomorrow, also, I have not cracked the case yet so I am not sure what they look like on the inside.
Sorry didn't know if prices where needed and I am not going to post up prices for every little think I have. I will post up price for the major items tomorrow.
they are 68mm bore and i am not sure what the stroke is, i think it is stock but I will check that tomorrow. Also, I don't think any port work was done to them as you can see from the pic.
Ok parting out a 97 banshee
Have many things
Cub cylinders w/ 68mm piston
Vito's Hemi Head
35mm Keihin PWK carbs with billet intake
K+N filter in stock air box
black painted a-arms with new bearings, seals, bushings
spindles with painted black hubs with new bearings
black paint carrier with new bearings and seals
front and rear calipers with new pads
lots of stock parts
just say what you need and i will get you a price
The engine is actually my father's. He would like to sell the whole engine together. Maybe if no one buys the complete engine he will sell parts from it.
Cub engine 68mm bore
complete engine comes with the bottom end and top end
has a vito's hemi head
the crank has been welded
the engine is still in the frame and can take pictures if need.
$1500 +s&h
engine is located in Cincinnati Ohio.
It sure has been awhile since I've posted on here. There is a chance of my brother and I going. If I still haven't gotten the swingarm I need for my banshee I will be bring my LT250R and RM250. My brother should be riding a cheetah cub Banshee.
I have the Alpinestar Tech 4's. They are pretty good, but mine are starting to get worn out over time. The are both forming rips in the stitching on the inside of the boots on the same spot on both boots and on my right boot the metal tip came off while I was riding. You will need to break them in and probably move the shifter up one notch to accommodate for the extra size of the boot, at least I did.
This upcoming saturday on sept 22 I will be going to haspin acres in Indiana with a big group of people. If anyone has plans to go next weekend let me know.