Hey everyone! I have a 99 shee with:
fmf gold series exhaust
pro design cool head and intake manifold (not sure what else to call it)
vforce reeds
stock bore
uni filter
tors and parking brake delete
jetted to 280 mains and 25 pilots
My problem is that it bogs through the full throttle (idle up to full throttle). I've tried 310 and 320 jets in case it wasn't getting enough fuel and have tuned the air mixture from all the way in to 6 turns out. There is no difference no matter what I do. The carbs have been rebuilt & synced, floats adjusted to 21mm, stator and coil tested and within range, no air leaks, tors and parking sensors have been cut out of the harness. The motor only has a few hours on it after just having redone the top end; I have not done a leak down test yet or compression test, but the compression seems fine.I'm not sure what else to try at this point. Any ideas?