Jump to content

R.R-1.1993

Members
 View Profile  See their activity

  • Posts

    67

  • Joined

  • Last visited

 Content Type 

Everything posted by R.R-1.1993

  1. R.R-1.1993
    So if i unplug it its suppose to spark if it was the problem??
  2. R.R-1.1993
    So on position NO continuity And off pos continuity
  3. R.R-1.1993
    And is there a way to just bypass and see if its that so i could buy it
  4. R.R-1.1993
    Does that mean my switch is trash but thats only on the off position? So how would that effect the on position
  5. R.R-1.1993
    I ment testing the on/off with head light switch And continuity cuts out on on position If i wiggle it n the off position it cuts out continuity
  6. R.R-1.1993
    When in off it beeps then i switch to on and stops
  7. R.R-1.1993
    Like what wires do i check while flippin switch
  8. R.R-1.1993
    How do i go about that??
  9. R.R-1.1993
    Did that and still no spark
  10. R.R-1.1993
    Only thing i havnt changed is the headlight and kill switch Clutchside but some guys say to unplug it and if it was that itl shoot spark out is that the rite way to test em
  11. R.R-1.1993
    No my buddys is a 95 and up And he dont have spark either
  12. R.R-1.1993
    Ebay haha but i mean i ddnt wanna buy expensive parts and still do this shit
  13. R.R-1.1993
    I replaced cdi (new). Stator (new) Coil (new) Harness checks out good with continuity So what can it be faulty parts?
  14. R.R-1.1993
    I got a new stator today still didnt do shit So what can be next thing to check I almost got all new electrical system but the harness itself
  15. R.R-1.1993
    The spark i ment You get zapped couple times then nothing put it on ground on block and nothing
  16. R.R-1.1993
    It did shock the hell out of both of us But goes away
  17. R.R-1.1993
    Do all grounds go together?? The previous owner gots all grounds linkn to eachother Like there isnt one thats suppose to go to a certain wire??
  18. R.R-1.1993
    Thanks fellas i ohmed out everything it checked out good I checkd all wires for continuity and everythings good My old stator fired up good and ran good so doesnt that mean its good This other i put fired up to so either both stators are fukd or im missin something
  19. R.R-1.1993
    No luck im going to try ohm reader tomorrow Is there a way to test if stator is good??? Not just it reading numbers on ohm reader
  20. R.R-1.1993
    So the card is not the rite measurement for the pik up
  21. R.R-1.1993
  22. R.R-1.1993
    How can i measure that w out tool???
  23. R.R-1.1993
    Ya but is that the rite gap???
  24. R.R-1.1993
    Anybody know how to set pickup gap on Pik up coil W out the tool of course i loosned it and i got spark but nothing again
  25. R.R-1.1993
    I have not my ohm readers jakd im gng for 1 in the mornin What is it suppose to read And how do u check them??

BHQ Quick Links

×
×
  • Create New...