DESTRUCTIVE

Lol ok cool do you recommend anyone or can you point me in the right direction

No I just found out about this forum

Ok I just bought it from eBay so maybe that's why. Is there a good place to get a stator for my bike

Hoppedupandcutdown, I have have the black and yellow from the stator unplugged right now. I checked AC&DC at the black and yellow wires and nothing. What to you mean by unplugged

Ya it's for AC I tried 3 different meters also with bike running

With bike off if I get .2-.3

Where is the ground on the stator at and what do you mean o/L

I tested the stator at the bullet connectors, and no voltage

The one I bought was from ebay not sure if that's why it's not working or if something else could be wrong. Does the flywheel have anything to do with the lights while the bike is running

Ok thanks for your info I will get a new stator any place you recommend. The fly wheel doesn't have anything to do with making voltage while the bike is running does it. I even checked for voltage at the wires for the brake light while bike is running and nothing

Keno I have no voltage from the regulator and the ground is tight

I have no voltage at the yellow and black wires coming from the stator with the bike running, with a DMM I have tried 3 DMM just to make sure it wasn't a DMM. Is it possible that the stator I bought is bad

My brake light bulb is good my fronts I have disconnected since they broke when I crashed a while ago. But I have no voltage going to any of lights. Is there a way to test the voltage regulator

My lights were not working so I thought I had a bad stator so I replaced it installed new one and I have no voltage to my lights still. Wires from stator on the bike right now(new stator) Yellow to Black from stator I have 0.2-0.3 White/red to white/green I have 117 Green to Red I have 13.9-14.4 Not sure what else to check made sure all grounds are good and even check to make sure the flywheel is grounding good. Any would be great thanks