-
Posts
183 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Buster91dg
-
-
cables are all in sync what's your best way to sync up the idle screw I just did the same amount of tun and went by engine sound people say it's ok for one to smoke a little more than the otherSlides are out of sync
-
Maybe wait more then 30 minutes for a response.
Are your idle screws the same? Are the air screws the same? Are the plug caps in spec? Are the plugs new? Are the jets perfectly clean?
-
Plugs are fairly new maybe an hour of easy riding on it and yes band new plug caps and yes air screws are 1.5 out and idle screw are as far in as they will go on each side idles great here's a pic of plugs
-
-
89 banshee. Bored .50 over brand new carb boots boyesen https://vimeo.com/147940065 reeds boost bottle carb synced fmf pipes k&n filter no lid jetting is 30 pilots 270 mains. Please help is this normal pipes are equally hot. NOTE:: the back fire you hear is bec I forgot to turn gas on but you can notice one side o be smoking A little more
-
No port work at all I'm located in ri I'll have to check on elevation has ratio is 32:1
-
Hi have a 89 banshee its bored .50 over fmf pipes and silencers k&n air filter with no airbox lid. And has a boost bottle. Stock 35mil mikuni carbs. 30piots 270mains and needle is 4th clip down am I close or should it be richer
One pipe seems to be smoking more than other?
in Banshee Repairs and Mods
Posted
Ok that's what I was told and motor hasn't been ridden hard yet