98_Shees2fast
-
Posts
29 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by 98_Shees2fast
-
-
Now is that from rings to cylinders or the ring gap by the oiler holes
-
Im using wiseco pistons so they are forged i believeDepends on kind of piston. Cast? Forged? The manufacture will tell you what they call for. I wanna say its like .002 to .003. Dont quote me tho.
-
What is a good clearance cuz i have some pistons id like to re ring alsoToo sloppy.
-
I have a g force +4 on mine also and i dont have play anywhere. I took s big hammer a piece of wood and just smacked it tight 2times and its good. I did put the nut on wrong the first time but was a simple fix..easy install also
-
Ok ill give that a try and see what happens thanks
-
Should this also help the tierod end seat in the spindle
-
Yeah i cant get into the spindle all the way....should i give her a love tap with a bammer
-
Ok ill try that but should the shaft spin tho..or is that normal
-
No the theads are fine. I didnt smack it or anything
-
So im putting new stock a arms and tie rods on my shee today. Well i got everything off and reassembled, but when i put it back together the tierod on the spindle wouldnt go down tight. I can get a few threads of the nut on, but also when tightening it the shaft spins on the tierod itself. Impact gun or is the tie rod bad?
Any help is appreciated...
-
Think you could scan copies...or no
-
What color blue or greyBest graphics that were made. There done. Skin stopped producing them. I found a set on eBay about a year I ago I bought. I just put them up on the shelf until I find a good set of plastics to put them on. Seat cover and all
-
Doesnt look bad but mine had a little darker ring...but also not ported either
-
44905 is the zip
-
I just did tors delete on mine also... I have boysen cf reeds and rad valve with fmfs and i have 27.5 pilots
-
1500 is prolly the lowest i can go
-
Its all stock pretty much and taken care of and its titled so its fair
-
I have a titled 03 400ex
New cst tires
Jetted carb
Pro circuit t4 pipe
New carrier bearings
Has park break delete and new chain
Located in Ohio
Sorry for the dirty pics not put away dirty tho
1800 obo
-
Nope thanks haha
-
I have a titled 03 400ex
New cst tires
Jetted carb
Pro circuit t4 pipe
New carrier bearings
Has park break delete and new chain
Located in Ohio
Sorry for the dirty pics not put away dirty tho
-
You have any skids left
-
Any cuts or tears in the seat?
Sent from my iPad using Tapatalk
-
None even has a good latch
-
Yeah its just the cone one and i have a lid with no front piece on
Piston clearance
in Banshee Repairs and Mods
Posted
If i check the gap from piston to cylinders and its .005 or less i can re ring them. Is that how i read it