98_Shees2fast

If i check the gap from piston to cylinders and its .005 or less i can re ring them. Is that how i read it

Now is that from rings to cylinders or the ring gap by the oiler holes

Im using wiseco pistons so they are forged i believe

What is a good clearance cuz i have some pistons id like to re ring also

I have a g force +4 on mine also and i dont have play anywhere. I took s big hammer a piece of wood and just smacked it tight 2times and its good. I did put the nut on wrong the first time but was a simple fix..easy install also

Ok ill give that a try and see what happens thanks

Should this also help the tierod end seat in the spindle

Yeah i cant get into the spindle all the way....should i give her a love tap with a bammer

Ok ill try that but should the shaft spin tho..or is that normal

No the theads are fine. I didnt smack it or anything

So im putting new stock a arms and tie rods on my shee today. Well i got everything off and reassembled, but when i put it back together the tierod on the spindle wouldnt go down tight. I can get a few threads of the nut on, but also when tightening it the shaft spins on the tierod itself. Impact gun or is the tie rod bad? Any help is appreciated...

Think you could scan copies...or no

What color blue or grey

Doesnt look bad but mine had a little darker ring...but also not ported either

44905 is the zip