Moe.Laub

I have some. Decent condition. Not show room though. Figured I'd let you know. I'll pm u my cell and I'll text u pics

A Buddy of mine has some Tyson j arms. I'm pretty sure there more narrow than stock. They need to be used with Shaws or floats. Stock shock won't fit. They are chrome as well. Lmk and I'll ask him

Stock style intake?

Air strikers. I Got a good deal on em I couldn't pass. I also just got a bigger motor now so I needed bigger carbs

No longer for sale dude sorry

I'm Selling my pj carbs. They worked fine on my bike with a dune ported 4mil. I decided to upgrade. Slides are nice. No leaks. Condition 7/10. Comes with CEG needles but no jets. Cable included. 150.00 shipped.

I have a set of cpi big bore inframes. Stinger tubes are 1.125. I need small bore pipes for my engine. I bought these and was told they were small bore but they are not. I'm wanting to trade for some small bore cpi inframes. Might think about shearer small bore inframes as well but Nothing else

Pmd

Anybody here have some brake rotors. Front and rear. I need them asap

Who's all going

I'm looking to trade some clean snap on tools for some 34mm pwk carbs. I'll put up 500 in tools for the trade

That was my fault man I'm sorry. I did check and I had one but it was beat up. Checked out in calibration just fine though. Basically I can get you a brand new one for a good deal

Yes basically anything you need in 1/4 and 3/8 drive

Pmd

Yes the inner hub wouldn't spin when I put the 32mm nut on. The steel bushing in the basket must have been worn down and was causing the inner hub to touch the basket when tightened. I picked up a new bushing and it seems fine now

Yes it is in neutral. No fibers or steels

It turns out my inner hub does not spin freely. Iv tried everything I feel was possible. Iv double checked my washers, bushings, gears. Everything seems to be in properly. I'm lost. Help would be much appreciated

Moving to repairs thread sorry

Ok I figured out the bushing issue. One of them was murdered. It turns out my inner hub still does not spin freely. Iv tried everything I feel was possible. Iv double checked my washers, bushings, gears. Everything seems to be in properly. I'm lost. Help would be much appreciated

So I went to put on my Hinson basket And when I tightened the the bolt. The inner hub wouldn't spin. I do have the washers in place. There was no slop with this gear. I then popped the gear out and replaced it with a my stock basket gear, and it spins freely but my basket now has slop. This gear from my stock basket, the bushing spins inside the gear. is this normal? Cuz on the gear I pulled from the Hinson, the bushing doesn't spin.

I'll take next in like

Sold

Cpi sold

Bump 60 shipped

Orv sticker plate