WALZ

$250 shipped including PayPal fees. Everything pictured EXCEPT carbs. Pulled some parts out of the attic. Lost a clutch and ended up parting bike after. Cascade ported cylinders with used pistons. Look good to me, no scarring to report. Cool head with race gas domes. Stock stator plate hogged out by white knuckle to+4 mill. reeds, blocks and boost bottle. This setup with T5's pulled 73hp on cascades dyno (to my surprise) Freebies = cascade billet gas cap, domes I assume are regular gas but not sure how to measure as I leave that to my engine builders plus an unknown stator w/ flywheel. I do not vouch for stator/flywheel as they came out of my attic. Typically I throw out questionable parts but do not remember what these came off. these are freebies. STOCK CARBS IN PHOTO NOT INCLUDED IN PRICE. Text/email is quickest and best way to get large photos. 208-703-1168 jesse@jessewallz.com

Banshee sold

banshee sold

Bike is in Boise, ID. Got it on CL Boise and Utah CL with delivery. No takers. If the bike is anywhere near $3k where you are you could get bids on uShip. Wait about 5 days and they'll bid each other down. People ask lots of $$$ but I don't think they get it. I sold a long travel, redline built, ported, race gas Serval last year. +6, dunable, 8 hrs on build w/ documentation, fresh 22" superlights, very sharp bike it took months to get $5k in Portland in May-July. There are some collectors that pay for stock time capsules but other than that I see many Banshees sit years with ridiculous asking prices. i picked up a show quality 4 mil for $3,800 last month (this bike's replacement). $1800 is likely market value in the west and maybe $500 more toward the E Coast. I believe someone could make at least an additional $500 on the part out.

Could you text me? 208-703-1168. I'll grab a few photos now and attempt to PM with attachments.

$1,800 takes it. 1999 w/ stock engine. purchased 100% stock for the wife in '05. Did top end and then frame off restoration powder coat at that time. Make 3 trips a year at best with some 2+ year breaks in between. Put another OEM piston/ring/gasket/reed pedals in summer 2016 for good measure, still had cross hatches in cylinder. Checked bottom end in Sept 2017: holds 6 psi for 15+ minutes. changed out countershaft and shift seal last year. runs well and ready to rip. Cascade throttle, billet gas cap, T6's, +6 swing, 20x10 9 paddle haulers, air pods w covers, tall Cascade bars, have title Text: 208-703-1168 Located in Boise, Idaho

I can't get the better pictures smaller on this G&@ forsaken IMAC. Text for more photos if SERIOUS. Good Haulers, +6 swing and plenty of cascade billet.

Wish I could get $2k for this bike as she sits in my neck of the woods. If I could get $900 plus shipping for the stock engine I'll break down the rest of the parts.... really don't want to break down, $1800 would take it. 1999 stock engine. purchased 100% stock for the wife in '05. Did top end and then frame off restoration powder coat at that time. Make 3 trips a year at best with some 2+ year breaks in between. Put another OEM piston/ring/gasket/reed pedals in summer 2016 for good measure still had cross hatches in cylinder. Checked bottom end in Sept 2017: holds 6 psi for 15+ minutes. changed out countershaft and shift seal last year. runs well and ready to rip. if DM doesn't work, text does: 208-703-1168 Boise, Idaho Can text more pics banshee 2

I rode St A's a couple weekends last year. Dunes are bigger than anything else, they will take all the horsepower you can throw at them. I started feeling bad for my bikes holding them wide so long up the hills. The storms were pretty crazy in both July and October. They would roll through, rip up the campground then be calm again. The sand is not as clean as Oregon Coast but not near as dusty as Glamis. Glamis has the best people watching, Oregon is the most scenic and St A's will give you the best roller coaster rides ever. Everyone needs to experience St A's once. Nothing quite like it.

I thought the store and Egin always opened April 1st. Good to know on the sketch sand in April, especially bad on 2 wheels. If ever there was going to be a late year this is probably it.

How are April conditions? We had a lot of snow this year, any way it could still be there in a month? Also, is the sand worse at that time? I hate the heavy garbage that swallows front tires on the Oregon Coast before it diess out. Could it be that bad at St A? Appreciate the insight

just wanted to quote unless he edits for anything less gay

Haha, you So fucking original!! (add Japanese accent) You and piss boy (sprinkler man) should get BHQ metal for so effectively fucking up legitimate threads... Such as this one where the seller was offered his asking price.

....except I offered full asking price yesterday

Your the only one stinking up the the thread. For one, an offer bumps to the top what in your eyes is a good deal. Two, put on your big boy pants and counter offer! Three, they do sell on fleabay less than $400 and obviously sellers pay more. As if a four were needed, because of GoFast an opportunity arose to sell for asking price since I was pressed for time. All moot since the seller is MIA and I was willing to pay his price since GoFast has been texting to buy mine. Shit, come to think of it GoFast and I are the only legitimate buyer and seller on this thread.

There may be an opportunity here: Seller, could you get the CPI's delivered in Oregon by Tuesday the 4th at the latest for $475? If a day late the entire plan is foiled. GoFast222: you want a set of absolutely perfect Shearer SB pipes with one ride for $375? I will be in Oregon to ship them on Wednesday the 5th. Bonus question Will my cascade billet pipe clamps fit the CPI's?

I'm not in need of a swing arm but would love to try a +4 instead of 6. I'll pay $300 PP gift shipped to try. Would likely re-sell....so if not offended shoot me a pm

good god man. 45 pounds of gas at seat height. That's a hardcore-hammer down rider right there. Where do you put the beer?

Fullbore made 4 color runs in march that were 60 days out when I called. I assume you must have known that and mean they are done with those runs and don't have any immediate plans for more.

FleaBay has numerous options like OEM & Acerbis. Fullbore is making a few runs, call them direct. RB, props for making a better product than I could ever dream to create. Add a grille, some stylish lines n' vents and you could be sitting on a gold mine.

Looking for blue rear plastics. Will race cut. Do not want any fades on the three loovers since they will stay. Thinking $100 if they can be delivered in Oregon before august 5th.