[got any good stories]

I love this forum 

[you fawkers aint makin a good impression on people]

I personally love the freedom to say whatever the fuck I please on here    I cant stand forums that impose regulations on rights given to me by my forefathers.  

[New BansheeHQ Shirts/Hoodies/Long Sleeves - Pre-Order/Pre-Pay Thread]

bump Tshirts still available? id love to get a hoodie and a shirt or two

[350 Engine part out, t5 pipes, ladder swingarm!]

im interested in the pipes please pm me thanks

[Chick banshee related parts.]

sell the seat seperate? 

[Banshee wierd noise SOLVED BITCHEZ!]

So I want to give BansheeHQ a huge thanks for helping me out with this issue. I know most of you guys must face palm yourselves everytime I ask a dumbass question but hopefully I wont be on here looking for help for awhile. Split the cases on my shee and discovered I broke some tranny gears. with all the parts in the mail i look to be on the bike by next week. Also i want to thank all those who have posted threads on how to split the cases and put videos on youtube. Ill post a start up video once everythings together.

  Ill post pics when i get home. School internet is shat!

 

[Smoking bad out one side only]

Broke two tranny gears. Got the cases split. I'll post some pics tomorrow

[What to do while in the bottom end?]

My dad won the first drag rabe ever geld ar friendship in his 1970 dodge challeneger. He's got the trophy to probe it haha. Got a flywheel or stator laying around your willing to get rid of cheap?

[What to do while in the bottom end?]

I live in Steubenville ohio. I topped it off with oil and it still made the noise. I got frustrated and slept on it. Drained the oil next morning and it was all black. Didn't really smell burnt though.

[What to do while in the bottom end?]

I didn't have the cover off while I made that video. Yes it was in nuetral. I did however start the bike with the flywheel cover off and nothing looked like it was out of whack the sound seemed to becomming from inside the cases in the rear of the motor. But what would you do first if it was your bike before splitting the cases?

[What to do while in the bottom end?]

I will, I pulled flywheel cover it didn't seem loose I couldn't wiggle it with my hand. How would I check to see if it's the flywheel key

[What to do while in the bottom end?]

I know but I'm just trying to gather as much input as possible before k start this tear down

[What to do while in the bottom end?]

With the bike on its basically the same noise but constant and much louder

[What to do while in the bottom end?]

If anyone hasn't a clue I'll post a video of it with the bike on but I have all the fluids drained currently

[What to do while in the bottom end?]

www.youtube.com/watch?v=a_r2bIdOn88

 

Here's the noise while the bIkes off.

[What to do while in the bottom end?]

Lol no tranny oil and the previous owner claims it was a 30 hour old rebuild from crank up. It makes a weird ass screeching/ grinding noise when I start it. It almost sounds like a dieing cat.

 

I can't afford to have the head honed unless it's relatively cheap. I'm working at Wendy's and I'm 17 I'm lucky enough to find a guy to split the cases for a case of natty light lol thank god for friends

[What to do while in the bottom end?]

previous owner claims its bored .40 over i guess im going to find out. ill probably do rings as well maybe pistons. anything else that would compliment the bike? im saving up for pipes fucking retard before me put a 2:1 system on it. from what ive read it really robs it of the top end

[What to do while in the bottom end?]

i ran me shee without oil for about 2 miles DOH!   i plan on replacing gaskets and all bearings if nothing else looks like it needs attention. But i figure while im in the bottom end i want to make sure ill never have to split the cases again while i own my shee. What do you guys recommend without breaking the bank? im mainly looking to never have to split the cases again but is there anything that has got a good bang for the buck while im into it? all input is welcome

[wierd noise from left side of engine]

www.youtube.com/watch?v=a_r2bIdOn88

 

Here's a video of the noise while the bike is off. I can make one of it on but it's basically the same noise just constantly and much louder

[wierd noise from left side of engine]

Pulled flywheel cover and started it. Sound seems to be coming from the inside of the case and in neutral the sprocket looks like it's trying to turn. I'm pulling clutch cover next to see if anythings loose.

 

ANY IDEAS?

[wierd noise from left side of engine]

Sorry I just spent all yesterday afternoon and this afternoon doing chassis bearings I figured I'd ask the forumn guys before diving head first. What kind of bearing are we talking here? Think I'll have to split the cases?

[wierd noise from left side of engine]

I can make a video tomorrow of the noise if it helps

[wierd noise from left side of engine]

So I ran my banshee for about 3 miles about 1 mile in it started making a strange noise intermittently I pulled in the clutch and it continued to happen intermittently maybe once every 500 feet. I dismissed it as the chain and babied it to my house. I put new chain and sprockets on and wheel and swing arm bearings. I start it up and I want to call it a different noise but it's definitely comming from the same place. Left side of the engine somewhere inside the flywheel cover I do believe. Checked the oil and it was low. I topped it off and started it up and it still makes it. It sounds like a high pitch rattLing/screech.

 

Only other thing I noticed was when I put the chain on the sprocket seemed hard to move then would be easy then get tighter. I thought I was just pulling the chain at an angle and not straight back.

 

The bike is making this noise in neutral pleae help

[Play in the A Arms]

Im replacing a bunch of bearnings on my shee. Now I already made the mistake of buying wheel bearings and hub bearings DOH! Is there a difference between the A Arm bushings and bearings? Is it an either or thing or do I need bushings and bearings?

[How to remove hub?]

I didn't realize it just pulled off. But unplugging it and plugging it back in really did the trick