Mr1Hundred

Oh, i think the pictures were set to private, i made them public now

yea the toggle switch grounds it for me right ?

and what is the thing with all the blue hoses coming out of it lol

what is the thing on the shifter ?

I rewired and soldered some of the connections so i could put the (cdi/voltage regulator/ground) in the front and delete the (tors/brake light/key switch) my question is was i suppose to connect the two wires that you merge to delete the keyswitch with the ground ? http://imgur.com/a/hLQnY

stock carbs are 26mm, post in the wanted section for 28mm carbs or something

CLICK HERE FOR PICS --------> http://mr1hundred.imgur.com/all/ All these parts came off a 2001, i bought the thing as a roller + the engine was in pieces All price are in USD + Shipping, i live in ontario, canada (postal code L0P1K0), prices are gifted or buyer pays fees if you want more pics or anything let me know Coolant Bottle: 5 +shipping (i have 2 of these) stock Clutch lever w/sensor, parking brake, parking brake wire (no clutch wire): 30 +shipping Tail light w/bracket: 15 + shipping y-2 cylinder head: 30 +shipping (no pitting but the bottom half of the left side was a little darker) 64mm Cylinders: 180 +shipping (also have the pistons if you want them ill send you pics, they are kinda black on the top so i wont ask for much) Airbox w/boots but no lid: 25 + shipping (there is only 2 of those clips on the side) Carbs w/tors: 60 + shipping (i opened them up they have 210 mains) Intakes+ boost bottle: 40 + shipping stock swingarm: 20 +shipping Bad axle carrier: 10 + shipping

fuck that picture (in the ad) is so funny

if you think it was a fair deal then thats all that matters, but i wouldnt have payed that much in my area

Where do you live, depends on area

also what are the dimensions needed for the gas and coolant hoses

Does anyone know where to get clear hosing for the radiator (must withstand the temp), also im looking for clear gas lines also, how does the stock impeller fail ? Does it shatter ? if i was to put a needle bearing in there instead of the bushing, would that fix the problemo?

Want to Buy: long rod 4mm stroker crank true'd and welded 34+mm carbs (gas) with intakes and pods +4 swingarm (not roundhouse style) Note: Im in Ontario, Canada (postal code: L0P1K0) so give me a price shipped or without any shipping

payment sent

yea, here is another banshee beater http://www.kijiji.ca/v-atv/sarnia/88-lt-250-r/599887350?enableSearchNavigationFlag=true

what clues ?

imagine a 6'6 270 pound man on an engine that has like 1/2 a horsepower

also, grind down the paint for your ground wire

hmm, not sure then, in my area it would be a good price

in the ad the guy says the quad is built, yet all of his mods are a joke

LOL ^^ i posted that one too, the guy said its bored 7 thousands over, making its a 420cc big bore ????? lol

http://www.kijiji.ca/v-atv/oakville-halton-region/2004-banshee-lots-of-upgrades-and-spare-parts/604952644?enableSearchNavigationFlag=true i emailed him, he said that the big bore kit was it was bored 7 thousands over therefore making it 420cc

Im looking for cylinders ported for a 4mm long rod stroker crank, just like in the title, porting can be MX/dune/drag dont care really(pref dune though) the exterior doesnt matter to me, just it needs to still have some cross hatching and still be a borable cylinder I live in ontario (canada), so give me a price without the shipping, ill pay for shipping, and if you have the coolhead/domes/carbs/pistosn/other parts that'd be great, im a university student on a budget so even if you do have this stuff im not looking to spend alot on mint condition parts, ugly and dinged up parts for cheaper is more my style right now

Hey man i PM'd you about your pipes, i have silencers for fattys, and im looking for T5 silencers