Jump to content

chris_sims1981

Members
 View Profile  See their activity

  • Posts

    43

  • Joined

  • Last visited

 Content Type 

Everything posted by chris_sims1981

  1. chris_sims1981
    should I get a spacer to compensate?
  2. chris_sims1981
    the location on the original pistons when i bought it were higher than the vito's piston. The cylinders were 5" and the case deck is 2 1/2" to the top of the base to the bottom of the jug " The vitos's part #V96870M68 and its about 1/8" or so tler than the piston that came in it which have the markings 8590H, 8963 and 69.95mm.
  3. chris_sims1981
    th rod has the yamaha engravement but I have no clue otherwise because the guy I bought it from didn't say it was stroked at all and I no longer have his contact info
  4. chris_sims1981
    I bought my banshee over the summer knowing that it needed a rebuild. I got new jugs that have been sent out for porting and a vito's 68 mm bore with standard pin location. After the install I found out that the piston petrudes the cylinders by about a 1/4 inch or so. Pic attached
  5. chris_sims1981
    I couldn't because the file size is too big. Which builder do you recommend?
  6. chris_sims1981
    I have a piston with the markings 8590H 8963 and bore size 69.95 and I was wondering who made it. I tried searching to no avail, also what would be the next size up? I have to send the cylinders out but I have to buy the pistons and ship them with the cylinders for a top end rebuild. Any help will be much appreciated
  7. chris_sims1981
    I'm gonna order the Clymer's tomorrow
  8. chris_sims1981
    Wow! That simple, thanks
  9. chris_sims1981
    I'm still very new to quads but I'm learning. I looked in the yamaha repair manual and it doesn't give details on how to remove the clutch push lever. Could anyone give me a few details on how to remove it?
  10. chris_sims1981
    Oh ok, thanks guys
  11. chris_sims1981
    Does wiseco have the size stamped anywhere on their pistons?
  12. chris_sims1981
    By the way I forgot to say that it has a Hinson quick change clutch
  13. chris_sims1981
    Thank for your help, I'm still new to working on quads
  14. chris_sims1981
    I have the manual just not familiar with it because its only my second bike and I never had any clutch problems until now
  15. chris_sims1981
    I bought it that way and the only thing i have done to it so far is change the clutch cover due to it having a crack in it, I didn't touch anything else
  16. chris_sims1981
    My banshee's clutch will not engage, I checked everything and found that the linkage below the carbs has no spring pressure at all. what could be the issue?
  17. chris_sims1981
    Still nothing?
  18. chris_sims1981
    it asked for a password, what is it?

BHQ Quick Links

×
×
  • Create New...