Smokie the two stroke

I have a nice set of 38-36 taper bore lectrons with brand new pacard bowls dual fed power jets set up for alky that I want to trade for a set of 38-40 mm pwks or air strikers must be set up for alky and have big bowls as well. Please no junk! I'm new to hq and have no clue how to post pics from my phone please call or text for pics 402-719-6177

I'm in dyer need of paddles before this coming weekend I had a guy sell me some paddles that were not his and had to return them any help would be awesome thanks guys! Looking for 13-14 paddle extremes on 8" wheels with a 72-74 RO.

Alrighty thanks a million! Any suggestions on what metering rod would be best and how about jets considering lectrons don't have jets?

Alky 300 foot.

Hey guys I finally took the dive from stock cylinders to a 421 drag ported cub block 68 mm 4 mill. My question is will my 38-36 taper bore dual power jet gravity fed lectrons be enough for this motor or am I going to lean it out? Any help would be greatly appreciated thank you!

I picked up a set of power pros out of frame silenced can anyone give me some input on these please it seems to rev way harder than my t-5's any info would be great. Dune/play port 5 degrees advanced 35mm pwks chariot head reeds and intake 4mill and punched .20 over.

If you have a cool head sounds like an o ring fell out of place and got tore during assembly they won't burn much coolant but will smoke like a freight train and anti freeze will tear a bearing out faster than you can blink your eyes. Pull your head back off and look for smashed or torn o ring and make sure to use a small amount of Vaseline or silicone to hold them o rings in place when setting head back on jugs.

I just rebuilt my buddies 98 still on stock pistons and bore it was doing the same thing and it was simply wore out check compression and what color are your plugs white, black, cardboard brown? Looks like two different jugs to me like one has been ported and those two boost ports are not stock someone put those in that jug the very top one is stock but the two at the bottom are not.

Hey guys I'm looking for a set of CPI I frame small bores if anyone knows of any for sale. I have a great set of chrome t5's I'm looking to part with if anyone is interested. Thanks.

I'm running the CEL needles on middle clip 45 pilots and 152 mains I believe everything done at HJR I moved needle one clip and seemed to help plugs are cardboard brown so doesn't seem lean but I will try one more clip and see if that helps. My buddy has 38 pwks and has no dead spot at all so I don't think it's over carbed.

Ok guys I have a 4mill stock cylinder with dune/play port 35mm carbs modquad head with custom cut domes power pro drag pipes chariot intake with internal crossover and chariot reeds running +4 degrees advanced and if I'm cruising along and pin it it falls on its face unless it's got a lot of r's built up any ideas I'm leaning towards jetting but stumped on what to jet it at I'm at 1,188 ft?