Ak_grizzly
-
Posts
91 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Ak_grizzly
-
-
-
How much for the crank shaft
Thanks
-
Great condition surefire m600 with red lens,pod switch,grip, and Quick disconnect
$150 + ride
Thanks
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC08790_zpsf7a5177c.jpg
-
Or Trade???
-
pair of Elka stage 4 triple rate shocks set up for a 180lbs xc rider
$700 shipped
Thanks
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC08782_zps03aebd72.jpg
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC08781_zpse4c3db9b.jpg
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC08780_zps928111d2.jpg
-
PM sent
Thanks
-
Pro design shifter PM
-
They are 34mm PJ carbs (he bought them from me) the jetting should be pretty close I would try going up or down one size on the pilot first and see what that does. If you go up and it is worse then go down 2 sizes and see if it gets better. Get the bottom end right then you can play with the main and make sure it is right also.
Ok....i'll try that
Thanks BUILDER
-
I hope this HelpsAre you carbs airstrikers or regular pwk,,,,,
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC_8748_zps5e2311e8.jpg
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC_8747_zps109d0caa.jpg
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC_8746_zps52f0b118.jpg
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC_8745_zps81513385.jpg
-
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC_8743_zps31a65a4b.jpgTry going down on your pilot. I have a ported 4mil 421 cub with 35pwk.152 on the main jet, cel on 4th clip from the top and a 45 pilot jet. I have 19 cc domes,VF3 reeds +7, CPI inframes. I ride at sea level. How do your plugs look?
[/quote
Here's what my plugs looks like
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/DSC_8744_zpse18f3ed4.jpg
-
I forgot....the air mixture screw,set at 1 turn and the niddle is at second grove from the top.
-
I let you know tomorrow how the plugs looks likesTry going down on your pilot. I have a ported 4mil 421 cub with 35pwk.152 on the main jet, cel on 4th clip from the top and a 45 pilot jet. I have 19 cc domes,VF3 reeds +7, CPI inframes. I ride at sea level. How do your plugs look?
-
How can u tell if airstrikers or regular pwk,,,,,Are you carbs airstrikers or regular pwk,,,,,
-
I have a 4mil sand ported motor with FMF gold series pipes, K&N pods, Coolhead with 22cc domes, vforce 3 reeds with 36mm Kehim Carbs and +4 on the timing plate. My problem is in first gear it bogs from no throttle all the way to 1/2 throttle then it pulls good to redline from 1/2 to Full throttle. I pulled the carbs and found the Pilot Jet was 50 and the Main jets were 150. I bought the carbs on Banshehq and I am not sure if these are the right size jets for my setup. Any recommendations? I filled out the Jetting FAQ below.
1) What type of aftermarket exhaust do you have?....... FMF gold series
2) What type of airfilter do you have?....K & N Pod
3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all..No airbox
4) What is your elevation? (If you don't know, go here: http://www.topozone.com )....120 feet
5) What size pilot jets are you using?....50
6) What size main jets are you using?....150
7) What temperature is your Banshee jetted for?....don't know
8) Do you have a port job? yes...by custom sandz
9) What kind of carbs?..... Keihim
10) What size carbs?....36mm
-
-
What brandGot mine from canada 155 $
you have to ground it out to.
Thanks
-
Here's my cooling fan wiring.
%5BIMG%5Dhttp://i1002.photobucket.com/albums/af148/rudog_01/th_Fan_zps619d4caa.jpg
-
-
Yes. I tried a few different ones from other quads before the trailtech amd all ended up as a fail. Either wouldnt charge worth a damn or died randomly. Ive had the trailtech on there for a couple years now.
[/quote
Ok....Thanks for the info:
-
Are they good reg/rec though,anybody had any problem using this product.Trail tech.
Thanks
-
Looking for regulator/rectifier 1 phase 12 volts 200amps
Pls...let me know
Thanks
-
Looking for billet intake for 38mm
Let me know
Thaks
-
BothAre you looking for chrome stock, or aftermarket ?
Thanks
-
Still looking
Thanks
SWINGARMS +6 &+12 BILLET BASKET STRAIGHT CUTS & MORE L@@K!
in For Sale - Parts & Accessories
Posted
Pm send