4mil89

hmm i jumped up to 52 and started dropping the needle. im back to the middle clip position and it seems good except its a little boggy on the low end and if i start a pull from low rpms and give it wot it like "purrs" or "breaks up" for about 1/2 second before it hits power band and then it rips...

4mil long rod Wiseco 795 64.50mm Stock modded cages with boyessen dual stage Graydon proline inframe drags Stock cylinder with passion racing 12 port (aggressive trail) Pwk 28s bored to 30mm 160 main 50 pilot Jjh needle Sealevel-500ft I started jetting this and its pretty close i first set the needle position in the middle and it had a hard time pulling out and you had to pretty much rev it up and dump it to get it moving. I tried moving the clip up (dropping the needle) and it only got worse. I then moved the clip down (raised the needle) all the way up and its alot better but its still a littlr off. Airscrews are 1,5 out. Should i jump up a size with the pilot? Lmk if you need any more info Kevin Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

If they look like mine and he wants to sell em lmk Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

You guys are too funny! Coal hills ftw! Yessir! Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Bump $150 shipped need these GONE! Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Hey! I read dirtwheels! You act like theres anything better to do in pa Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

These i guess are what you call hand coned pipes. There a bunch of sections welded together to make up the expansion chambers...if you do some research a guy on here stated he has a dirtwheels that stated these pipes were top dog when tested against fmf, toomey, pro circuit, bills etc Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

I think i have what your talking about...i havent seen anyone else with them though and ill tell you this i thought they were junk too until i bought a pair of sb sf cpis and felt no difference and sold the cpis Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Location? Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Check my fs thread i have a nice unported set for 160 shipped lmk...65.50 bore Kevin 717-826-4197 Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Still available? Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Keep this up still got it! Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Up Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Bump Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

75 shipped Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

$160 shipped! Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

bump pm sent lets get these gone

yes sir

I have not recieved any texts from you im completely confused about what you are talking about... Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Let me check how much it would be to ship these... Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Thanks make reasonable offers need to.fund a coolhead and domes... Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Ill buy it if you put it on..lol Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Bump need these gone 175.shipped Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Hello i have an 89 j arm banshee. i was about to.put my calipers back on and relized that both boots are ripped. I havent been able to find any rebuild kits for these "early style brakes". My question is what works with what? My understanding is that the hubs are all the same but 87-90 spindles calipers and brackets are different. Can i buy later style calipers and brackets? Will they bolt up to the spindle? Any help would be greatly appreciated this is a setback as i really wanted to get this riding this weekend Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

I have for sale a set of wiseco 795 pistons. They are used with some carbon build up on top. They came out of a perfectly good running engine with good compression. Im looking for $100 obo plus shipping. Make a reasonable offer and there yours. Sent from my SAMSUNG-SGH-I717 using Tapatalk 2