ric-ross1
-
Posts
744 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by ric-ross1
-
-
What condition are the shocks in?
Sent from my iPhone using Tapatalk -
Olive oil extra virgin is my choice, nice and smooth!
Sent from my iPhone using Tapatalk -
It was the last wire I had left from a long time ago, but I can tell you that it wasn’t thick, what’s the size are you supposed to use?
Sent from my iPhone using Tapatalk -
If you still have them PayPal ready.
-
I already installed the o rings on the head and torqued it down but motor hasn’t been ran, I should be ok or do I need new o rings? Yes, everything was supplied by the builder.
Sent from my iPhone using Tapatalk -
Is it not safe to run?
Sent from my iPhone using Tapatalk -
I didn’t like the numbers but builder said to run it, I finished putting the head on yesterday so I have a leak down test next, as far as compression test I won’t be able to get once for a few weeks due to the frame being gone for powder.
Sent from my iPhone using Tapatalk -
As per the builder I’m ok to run it. Gusto I already paid for those cut domes for the build.
-
7 hours ago, kawa110 said:
Oem base gasket?
Cool head?
Sent from my iPhone using Tapatalk
The gasket set provided by builder. Driveline cool head.
6 hours ago, gusto said:Call HJR tomorrow.
I will, J tried today but I’m sure they are busy with the Holliday’s.
6 hours ago, sheerider11 said:Sounds about right for hjr
Sent from my SM-G970U using Tapatalk
Thanks, trying to be done with putting it together and set it aside while I build frame.
5 hours ago, n2otoofast4u said:Lather, rinse, repeat
Might need more solder wire lol.
-
Got to put the motor together 4mil, did a squish test and I got 1.16mm and 1.06m, it’s got 23 4 mil domes which were sent by the builder for a pump gas set up. That numbers seems wrong.
-
T5 still available?
-
Ride height needs to be checked with you on it and in riding position.
Go read the suspension guide and make sure your issue isn’t covered there.
Chances are that the setup is off, but it is possible that the ball joints are wrong. Keep us posted and we’ll get you sorted out.
Sent from my iPhone using Tapatalk
that but I’m pretty sure it’s supposed to go on the outside not the inside lol.
Sent from my iPhone using Tapatalk -
After some more digging I came to the conclusion that it’s a driveline head but they don’t make them anymore...
Sent from my iPhone using Tapatalk -
I'm looking for the 2 bolts that go from the motor mounts to the bottom of the cases.
-
Is your ride height slammed and the camber set for that ride height?
Should be 6.5-7.5” off the ground a few inches ahead of the engine.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk -
Thanks for the info guys, I’m looking to build a 4mil this winter so i wanted to see if i needed a new head or that one would suffice.
Sent from my iPhone using Tapatalk -
why does it looks cheap?
looks like a driveline head to me. They are good heads, made in the good ole usa and function the way they should.
btw make sure you are running BR8ES plugs idk whats up with the plugs that are in that one pictured
Usually quality stuff has a engraving or stamp somewhere but this head has absolutely nothing. I have some of those going in before next ride.
Sent from my iPhone using Tapatalk -
Bought a quad and it came with this head which to me it looks like a cheap one, going to build a 4 mil and wanted to see if I need to ditch this head, no markings on it whatsoever.
Sent from my iPhone using Tapatalk
-
Here is the other side.
Sent from my iPhone using Tapatalk -
Got the bike last week and going through everything and noticed the tires are ate up on the inside, went to adjust camber but the nut is only hanging on by a few threads.
Sent from my iPhone using Tapatalk -
buy new one.......Only buy OEM but like 110 bucks...
I did. Thanks
Sent from my iPhone using Tapatalk -
Wtb oem ignition coil. PayPal ready.
Sent from my iPhone using Tapatalk
-
How are you going to post this and provide no pictures? Condition would say a lot about the value.
-
I know it sucks but for a 500 project that runs take it apart, fix it right and be on done with it, no worrying about it anymore.
Sent from my iPhone using Tapatalk
Looking for stock carbs or close to stock size
in Wanted
Posted
Pmd.
Sent from my iPhone using Tapatalk