Anthony133

Im starting to put together my 4mil project and need to know what carbs and what size i should use, any suggestions?

Please PM me, i will not be notified of comments therefore i will not respond. TEXT 708-224-8659 or email [email protected] or PM more more info AND PICTURES -Rear Skid Plate- $20 -Gas cap with hose- $15 -Rear Brake Disc HUB- $30 -Rear Sprocket HUB- $30 -2 Rear Brake Discs- $10 each -One Yellow front Shock- $20 -Rear Shock Linkage- $30 -Cylinder Head- Professionally Cleaned- $40 -Front Brake Lines (Reservoir to calipers)- $30 -Front brake Reservoir- $30 -TWO Tors units- $20 each -TWO Swing-arms- $40 each -Carrier Unit with axle Drum- $40 -Reeds-$20 -Intake with tube-$20 -Steering stem with bar clamps- $30 -Clutch/Parking Brake Bar Assembly-$20 -Foot Pegs-$20 -Throttle Assembly (With Wires)- $30 -Throttle Assembly (Without Wires)-$30 -Silver FRONT Hub Set (Could Use Bearings)-$40 -Black FRONT Hub Set (Needs New Bearings)-$30 -4 Tie Rods- $20 each Set of 2 -Spindles-$50 -COMPLETE Silver A-Arm Set( 4 A-Arms, All bushings, All bolts) Everything to bolt on and use- $100 -Radiator with cap and hoses (Fins are in EXCELLENT condition, Professionally cleaned out, Painted) $40 -Clutch Cover-$20 -2 Plastic grills -$10 each

One of my buddies painted his red, and looked GOOD, painted them last year and they still look good. He used spray paint from kmart. i don't know how it lasted but it did.

Left Heel Guard SOLD

Tail Light SOLD

Yes its finally for sale My 1999 Yamaha banshee. It has great compression and runs good. Has ALOT of power and is a blast. Sadly, im selling it for a 4stroke bike. It is currently dirty and plan on washing it soon. Especially since i'm selling it. Mechanic owned and maintained, TITLE in hand Mods are: PTR ( Paul Turner Racing) full exhaust V-Force 3 reeds After market air filter jetted to run without lid Stainless steel allen head bolt kits new water pump new clutch tors eliminator moose racing bare DG nerf bars New front brake pads New front wheel bearings New spark plugs it has 2005 limited edition fenders New parking brake assembly Radiator was got its fins straightened, radiator and hoses cleaned, NEW hose clamps. Wire harness has been re-wrapped around sections that wore down. it has Douglass rear rims INCLUDES: The banshee Spare axle spare carrier bearings Extra swingarm Extra set of foot pegs Extra skid plate Original TORS Stock Reeds An Extra set of Dunlop kt335 Rear tires For all this im' asking $2400 OBO just ask, worst i can say is no. PICKUP ONLY!!!!!!!!!!! No trades Call or text 7zero8-2two4-8six5nine If i dont answer, leave a message

yea i know, couldnt hurt to get it out there first though

Yes its finally for sale My 1999 Yamaha banshee. It has great compression and runs good. Has ALOT of power and is a blast. Sadly, im selling it for a 4stroke bike. It is currently dirty and plan on washing it soon. Especially since i'm selling it. Mechanic owned and maintained, TITLE in hand Mods are: PTR ( Paul Turner Racing) full exhaust V-Force 3 reeds After market air filter jetted to run without lid Stainless steel allen head bolt kits new water pump new clutch tors eliminator moose racing bare DG nerf bars New front brake pads New front wheel bearings New spark plugs it has 2005 limited edition fenders New parking brake assembly Radiator was got its fins straightened, radiator and hoses cleaned, NEW hose clamps. Wire harness has been re-wrapped around sections that wore down. it has Douglass rear rims INCLUDES: The banshee Spare axle spare carrier bearings Extra swingarm Extra set of foot pegs Extra skid plate Original TORS Stock Reeds An Extra set of Dunlop kt335 Rear tires For all this im' asking $2400 OBO just ask, worst i can say is no. PICKUP ONLY!!!!!!!!!!! No trades Call or text 7zero8-2two4-8six5nine If i dont answer, leave a message

Basically heres what happened: idiot i was riding with sunk his quad and was getting hypothermia. went back home, switched from bike to banshee. cold weather, barely warmed it up and took off with a heavy load of two people. I know it was a bad choice but someones life was possibly in danger. came home and it wouldn't shift into N. It would go straight from 1st to 2nd and 2nd to 1st. then me getting mad, i slammed down shifter and not it doesn't shift at all, just has alot of play in the shifter. Before i rip it all apart, any idea what broke? (besides my common sense)

Rear Brake line SOLD

Honestly cant remember if they are itp or douglass rims, i think they are itp but they look like douglass. Either way, they both have BRAND NEW valve stems, the both have their dings but do dents or serious damage at all. Both hold air without any leaks. The 10" looks great on any atv, i had them on my banshee and i wish i still had them on there. They need to be cleaned and polished but the do Polish up nice! Any questions please ask. They are 4/156 bolt pattern and is 6"/3" offset. http://www.ebay.com/itm/111014264832?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Price shown is what you pay!

Complete REAR Brake system SOLD

ALL 4 rear hubs SOLD

Bar mount & ignition SOLD

axle sold

I currently use yamahalube 2 stroke, should i use something else?

Ok then make an offer, i NEED it gone

Needs to be cleaned and has a bent rod. Its getting replaced with a 4mil. $100 shipped

Its posted http://bansheehq.com/forums/index.php?showtopic=163633#entry1442100

Tell me if your from BHQ!!!!

New List Posted

Heres what i have left and it all needs to go. Everything is stock and in great condition unless otherwise stated. Some parts will need cleaning All Prices are Shipped to U.S. ONLY Text me, Email me, or PM me for faster responses and pictures!! [email protected] 708-224-8659 I have: 2-wire Tail light- needs new red lens- $25 Ignition, Key, and Bar Mount- $30 RearSkid Plate- $20 Gas cap with hose- $15 Rear Brake Disc HUB- $30 Rear Sprocket HUB- $30 2 Rear Brake Discs- $10 each COMPLETE Rear Brake Assembly (Caliper,Line,Master Cylinder,Resevoir, Pedal and clip) $80 Rear Brake Line-$20 One Yellow front Shock- $20 Yellow Rear Shock- CLEAN- $75 Rear Shock Linkage- $30 Cylinder Head- Professionally Cleaned- $40 Front Brake Lines (Reservoir to calipers)- $30 Front brake Resevoir- $30 TWO Tors units- $20 each TWO Swingarms- $40 each Carrier Unit with axle Drum- $40 Reeds- $20 Intake with tube-$20 Steering stem with bar clamps- $30 Clutch/Parking Brake Bar Assembly-$20 FootPegs-$20 Silver FRONT Hub Set (Could Use Bearings)-$40 Black FRONT Hub Set ( Needs New Bearings)-$30 Throttle Assembly ( With Wires)- $30 Throttle Assembly ( Without Wires)-$30 4 Tie Rods- $20 each Set of 2 Spindles-$50 LOWER A-Arms ( With Bushings) $50 COMPLETE Silver A-Arm Set( 4 A-Arms, All bushings, All bolts) Everything to bolt on and use- $100 Radiator with cap and hoses ( fins are in EXCELLENT condition, Professionally cleaned out, Painted) $40 Clutch Cover WITH Water Pump- $40 3 Plastic Grill Inserts ( 2 black and 1 bright yellow)- $10 each Left Heel Guard- $15 Both Axles- PICKUP Only- $50 each

I have a complete list of all my parts at home, i will upload them later with the prices. Thanks

PM's Sent

Since i have so many parts, im not listing prices. Pm me or reply for prices. we will agree on a price, there is NO bidding or anything like that,