LiveFast

Alright. Don't the vf3's come with new intake boots?

By Wildcard: Hot Rods 4 mil long rod w/ true and weld Aggressive trail/ MX port Shift star mod Dual valve pingle .020 overbore/hone Wiseco 795 piston kit Pancake bearing-alan wrench style stud 3 HD clutch springs Seal Kit Clutch lock washers Base gaskets 1184 Sealant $1,240 Said the dmc aliens i want would do fine From mull engineering: Billet aluminum water pump drive gear Stroker head mod. $170 On the way: (new upgrades) vf3's, proflow filter kit, billet impeller, new airbox, lid, stock clutch cover stock Stator cover, covers for the clutch cover Already have: DG exhaust, boost bottle.Planning on upgrading to DMC Aliens

Honestly, I don't ride the hatfield-mccoy trails. I'll have to get my permit to ride it this year though because they've took over where we go in at. I usually ride windmill gap, sunnyeye, and the stair steps. But I see you're from trinity, NC. I'm from Thomasville. Lol

Alright, thanks!

Gave Brandon at Wilcard Racing a call. He let me know everything I needed to know and what kind of port for my style of riding! Going to be shipping him my cylinders and getting my long rod 4 mil from him.

I'll check that out. Which one is it?

Lol, I see. I've been wanting to go up north and ride a little but never have the chance.

Montcalm, about 20 minutes out of Bluefield.

Alright, I appreciate it! I've been wanting to do it for a while and i've been watching the other 4 mil posts and learning little by little lol

I currently have a 1999 banshee. All stock except for dg exhaust. I'm wanting to do a 4 mil stock cylinder, but not spend a whole lot of money. I already have vf3's, a proflow airfilter kit, billet impeller and a few other odd and end things on the way. I'm planning to do a hotrods 4 mil long rod crank with the 795 series wiseco pistons. I want to keep it looking stock, so i'm leaning toward getting the stock head milled. I also want to do dmc alien exhaust. I trail ride with a little hillclimbing and friendly racing every now and then. I just have no clue what port job to get. Also, could the billet basket wait? I plan on getting new clutch plates over the summer as soon as I get this build finished, so I thought I would get the new basket then. Any help or opinions would be appreciated.

Looking for a stock banshee engine for a pretty good deal. Anybody have one?

Alright man, I appreciate the help. But would you be able to tell a difference with the boost bottle and reeds?

Alright man, I appreciate it

Some trails are tight, but would it overheat or anything? Did you use stock reeds, and did you bore the cylinders, or are they stock with just the port?

I thought the spacers helped?

Hey guys, my stepdad has a 06 se banshee with pro circuit platinums, 304 silencers, and a boost bottle. He wants to put VForce 3 reeds and the spacers on it but doesn't know if he has to rejet for them, and if so, what size. Could any of you guys help me out?

I'm not wanting something seriously fast, just something that will surprise you every time. I was thinking maybe just a port job. I just can't decide if I want to start with the motor or suspension.

I'm building a banshee from a bare frame up and I was thinking of starting with the engine first. I ride trails and some opened up gravel roads, I also race a few buddies once in a while. I was wondering should I go with a 4mil, or just porting? Do I have to have the cylinders bored to do a 4mil? Any suggestions would be great. Thanks, Nick

I will be doing some trail riding, maybe racing, hillclimb a little. There are no dunes anywhere near me, it's all mountains. I also have a 06 crf250r so I won't be riding the banshee every weekend. But I want something that looks really good and will surprise you everytime you ride it.

Hey you guys, I'm new to bansheehq. Anyways, I'm getting ready to start on a build, starting with a bare frame. I plan on starting with the rear first. I was thinking about going with Laeger Swingarm, and an Elka shock but I'm not sure. It's my first Banshee. Could you guys maybe give me some suggestions? Thanks, Nick