Nik

ill def do a compression test sometime tomorrow and let you know how that goes..appreciate it dudes this sites the sh#t..went on to bluetraxx and that sites about as useful as an inflatable dart board..ordered all recommended parts so hopefully ill have this beast up and screaming soon..

Ill start off by saying im new to the banshee world but bought one yesterday and after a good hour and a half of riding im addicted. I bought it off craigslist and the main sell point to me was the top end had been rebuilt with only 4 hrs on the machine since the rebuild. Didnt care for whatever other problems as i also want this to be a project bike. I was able to pull the thing apart all the way to the intake manifold so the air filter, carbs, tors, reeds, gas tank, and spark plugs are all out. Now its time for the fun stuff. Id like to get some advice on what reeds to get, what kind of jetting set up to use, and what would be the best eliminator kit available. It is a 2000 banshee and as far as i know the only mods were the rebuilding of the top end and full pro circuit exhaust. Id like to start ordering as soon as possible so hopefully i can get some quick help. And 1 more thing. I noticed after the ride that the right side pipe was letting off more smoke then the left so i let it cool down for a bit. After a good hour of letting it cool down i started it back up again and same thing happened while the right side exhaust was hot as hells ass the left exhaust was cool to touch. A friend advised me to check the sliders and make sure they were synced so as i pulled everything apart i checked it out. They were both in perfect sync so if anyone has any other ideas let me know. I cant wait to get this thing running again.