bball23

im about sea level I just want to know what stock jetting is for the 2 in 1 carb...

I believe 35 mm

Hey all, I just bought a banshee with a trinity 2 in 1 carburetor. It is a kheihin carb and i am wondering what are the jets i need for stock exhaust pipes using this carb. All responses will be greatly appreciated.

For sale I have some left over parts: CDI Boxes- $50 each shipped Underbelly skid plate- $40 plus shipping Clutch basket-$45 shipped Stock Carburetors with throttle cable and TORS (Need to be cleaned)- $70 shipped Everything is best offer. Parts located in Shelton, CT. Text 203-751-4702 for pics. May have other miscellaneous parts just ask!

CDI BOXES/ STATORS $50 ea. shipped. Or take them all for $170 shipped. Need this gone and have some other parts included in the pics. If you need anything else just ask i may have it. Text 203-751-4702 with needs. Axle is sold... http://s1154.photobucket.com/albums/p528/bball232/

Axle and Skid plate sold.

pm sent and its 50 each

Any offers? Need this stuff gone!

http://s1154.photobucket.com/albums/p528/bball232/

Miscellaneous bolts- $2-$20 Clutch baskets- $40 ea. DuraBlue Axle w/hubs-$150 Clutch Covers- $25 Underbelly Skid Plates-$45 ea. Boost Bottles/ Stock Crossover Tubes- $15 ea. Bent Crankshaft (for parts or repair)-$20 Stators, Cdi Boxes, coils, electric switches- $50 ea. Mikuni jets-$5 a pair May have other parts just text 203-751-4702 with needs and for pics. Parts located in Shelton, Connecticut. Thanks! Prices do not include shipping.

Sold all of my banshees and have some parts remaining... Miscellaneous bolts Clutch baskets DuraBlue Axle Clutch Covers Skid Plates Boost Bottles/ Stock Crossover Tubes Bent Crankshaft (for parts or repair) Stators, Cdi Boxes, coils, electric switches Text 203-751-4702 with your offers, may have some other parts as well just ask. Will try to get pics up as soon as possible but for now text me and I can send pics throught text...

If you separate I will take the airbox mount...

Is powder coating my cylinders a good idea or will the paint wear off from the heat? Also does anyone on here powder coat and could give me a price? I want the color to be dark red. Thanks!

Thanks very much guys, I will try that.

Hey everyone. I just purchased a Trinity Stage IV 2-in-1 Carb Kit that I want to put on my banshee but im unsure where to even start on a keihin carburetor. Right now I have Toomey T6 pipes, pro design coolhead, and the new carburetor. My 26mm mikunis that are on now are jetted at 280 mains and 27.5 pilots and it runs great but I want to try on the trinity carburetor. My elevation is 50ft above sea level and it is about 60-90 degrees here in CT. Any help would be greatly appreciated. Thanks!

Just bought another drag banshee and it has no spark. I put the coil on my good banshee from it and the coil is good... What else should I check? What should the flywheel be at?

If you have a brake line for +12 swingarm please pm me. Thanks!

Looking for a carb synchronizer to sync my mikuni carbs. If you have a used one for cheap PM me. Thanks!

K ill get a pic later today

yea good deal if theyre wiseco pistons..

I think I just received a set with my rebuild kit I got because there was one set of screws that did not fit anyehwere on the carbs... Do I just need the screws or anything else? And do I have to drill holes?

My banshee seemed to have a high idle and i went to see if the slides were bottoming out or not. They were not clicking when letting go of the throttle so i decided to adjust the tops so that the slides would bottom out. Now it will start but will not stay idling on its own unless its choked... The previous owner took off the T.O.R.S units but I know when you do this you are supposed to drill holes and install idle screws or something? I am not sure about that but think that may be my problem. There are no idle adjusting screws and the only way I can get it to idle perfect is if I lift up the slides a tiny bit... Can anyone help and tell me if I should buy idle screws or if its allright if I have the slides slightly up higher a tiny bit. Thanks!

I messed with the carbs and I guess the floats were stuck and now it starts just doesnt stay idling for a long time like it did before but thats because I messed with the slides... Thanks for all the help everyone.

Yea I must have done something wrong but i cant see what it can be. Im going to take a look at it again right now.

the plugs arent really too wet though and i did take apart the carbs again and put them back in...