MM379

Now I have a problem...i think. Installed the +4 swing arm last night and now the rear fenders are about 4" above the tires. Now either i gained alot of weight in a short amount of time, or there is a promlem here. I think the second option. I don't know who made the arm because it was included in the sale of the atv, but it does seem to use the stock rear shock set-up. The rear shock nut is tightened down about half way on the threads against the spring. Does it need a heavier spring?

Thanks for all the comments and help. I knew about o and x ring chains before but never heard of a z ring. Tha riding i plan to do the most is dirt trails along with sand and a little riding in the snow if we ever get any up here. I wasn't really sure what was the best general chain to go with. Didn't know if there was a brand to stay away from or if one o-ring is the same as the next o-ring.

Hey guys. I am trying to get some maintenance work done to get in some riding while this winter is so nice. When i bouthe it a +2 swing arm came with as well as some other parts. Turns out the +2 swing arm measures out to be a +4, so it looks like i'll be switching to the +4. The +4 needs bearings in the front so i got some from pivot works. Since i am going longer i figured it would be a good time to swap out the sprockets as they are worn and replace the chain. This brings me to my question. What should a person look for? I have seen o-ring, x-ring, and even a z-ring or non o-ring style chains. What is best? I went with the stock tooth set up on the front and rear sprockets and the only things done to it that i know of are different carbs, fmf exh, and the cool head. I found these two on dennis kirk and didn't know if they would be worth using. 520 FB https://www.denniskirk.com/moose/520-fb-o-ring-chain.p110206.prd/110206120.sku R4 520 https://www.denniskirk.com/renthal/r4-atv-z-ring-chain.p110258.prd/110258120.sku

I searched ebay before and only got stockers. All look good. Planning on keeping the heelgaurd so they will have to fit with that on too. Now I know where to look. Ok. Thanks everyone!

I am having some trouble finding bigger foot pegs. Seen them on nerf bars, but not for use without the bars. Anyone make them? Pics? Any help would be nice.

Yup just wanted to add one more. Hope this STI is a "quality" new company.

RM also has a newer brand called STI that are priced a little cheaper than G-force... I already ordered up a set, hope they are good.

I live in New Ulm and try to get out to watch the climb at the dutchman club every year. Thanks for the welcome everyone! Looks like a cool place here.

How long are the fronts mount to mount?

I plan to be there about the middle of march. Hear it is a pretty good time. I have liked the banshees for a long time, just been riding 4strokes for a long time. Had a 500 predator, kfx450r, 700 raptor. Decided to get a banshee because they are fun and easy to work on, not to mention the amount of aftermarket parts.

Just picked up my first banshee a couple weeks ago. New to banshee's but not to four wheelers. Right now i'm just doing some work to it to get ready for a trip down to the little sahara with some buddys. It has had a few things done to it already, like bars and risers, head, carbs, longer swingarm, FMF sst full exh. I plan to go through it from the ground up, but that will just take some time. Got a couple of pics...not much yet.