FraireRacing

Dam good question I wanted to stroke my quad but i beat all my buddys with 4mils lol well when my bike was running good

I tried all aftermarket, then went back to stock, and mixed around and nothing. But I know it must be something stupid but cant figure it out

I have tried both but problem still there, but what exactly is the difference. A friend told me that it gives better spark but then another said it just helps with lights etc but nit really the spark? Which is it?

No one interested in some Toomey T5's?

I have a set of T5's in good conditions for a set of CPI in frames for sb

Nice set up good luck with the trade

How much does the ricky stator help or what's the difference? Anyone know?

Do you have any pics of the in frames

Do you have any polished wheels you can throw in the deal

I've tried different stators and it does the same shit

Comp don't know as for the gap i have always left term the way they come in the box and cdi box i have a stock one and a aftermarket procomp one and stator is a ricky stator

I also replaced the fuel line to a bigger one

I traded the cylinders but the pistons are brand new and i had the cylinders honed. The head is brand new as well as the domes and all new seals and gaskets

I had a set of bored out and trail ported stockers 65mm with vitos super stocks and a 36 pwk and now i put a aet of drag ported 66 jugs with a set of wiseco pistons and a 39 and nothing

Im running a 2-1 aluminum y with a 39 pwk

I have had a problem with losing power on my right cylinder. I checked it and checked it and just couldn't find what the problem was. I changed out stators, flywheels, coils, wires, plugs, cdi box, reeds, carbs and i recently put a totally brand new top end ( new cylinders, pistons, domes, head, gaskets, and even changed out the crank seals too and the problem still persist. Can you guys let me know what you guys think it might be

What kind of cpi pipes do you have?

Thanks

Lol, ticktoc that's just hilarious

Thanks

Correction I need a base gasket lol.

Anyone have a thick head gasket for a set of cylinders that have been decked. I'm using a pro design cool head

I have a set of stocker's with tors delete and idle screws, and i have the intake boots too. Let me know in interested

Kevin at HJR is Highly Recommended Great Customer Service and Absolutely Great port work!!!!! Would Recommend to Anyone from mild porting to full drag this is the guy to go to. Hands Down

Great Seller!!! Highly Recommended from my part Very Fast Shipping Will gladly do business with him again