BansheeBoy347

I have a real nice fulmer helmet that I purchased back in the summer. But I have never even put it on. It has real nice detail on it and the color is yellow and black. Will post pics later today. $75 plus the shipping.

$60 Shipped

It has some side to side play on the stock basket but it aint grooved at all. Looks like somebody has sanded them down. But I hear that you can run them with side to side play. But I'm still going to get a billet basket but can I use my stock inner hub?

I just got another Banshee and I'm wanting to upgrade the clutch on it. If I get a billet Basket will I have to have to buy another inner hub and pressure plate? If so what all do I need to purchase for it?

The game is in good working condition and looks like new. The games are NFS Carbon, GTA 3, GTA Vice City, GTA San Andreas, Super Truck Racing, Madden 08, Snow Cross 2. It has 3 controllers- 2 wired, 1 wireless. 2 64mb memory cards. And all of the cords to plug and play. My little cousin is selling all of his video games.

I have for sale a Crank that came out of a 97 Banshee. It broke one of the rods off but the inner and outer bearings are good. And it comes with new rods and rod bearings. $50 plus shipping.

Yea its at the bottom right of the flywheel.

The pickup starts to rub the flywheel when the cover is on.

Ok when I set it to where its supposed to be. It don't rub but when I put my stator cover on, it will rub the flywheel.

Yea I thought it would work but I went ahead and asked you all. Just in case it wasn't the right one.

The plugs look the same its just that the new stators plug is a little bit bigger. The new one will plug into my other plug. And the new stator is wider than my stock one. Are the aftermarket stators supposed to be wider than the stock one?

Yea that would work but I'm the new stator pick-up is rubbing my flywheel.

So the one that came off of my banshee is the old style?

I just bought a new stator for my banshee and I'm thinking I have got the wrong one. My frame is a 97 but IDK if my engine is that model. Because I bought a stator for a 95-06 banshee. And the old stator that was on it is smaller, and the plugs look a little different. So maybe I have the older style engine. Here is the pics of the plugs, the one with the orange on the inside is the new one. And the other one is the stator that came off of it.

I am looking for a gasket that goes between the carb and the bowl. The carb is a 40mm Lectron Power Jet. Does anybody know where I can find one?

Ok I figured it out thanks guys.

I have did that and it still rubs. Do I have the wrong Stator?

I just bought a new stator for my banshee. And its wider than a stock stator, but should the flywheel magnets have contact with the Pickup coil magnet? This is when I put my stator cover on.

I found some 49in Super Swamper Iroks just have to come up with the money.

Need this stuff gone guys.

I'll take the ASV lever and perch.

It should have images in there. But there is a post in this section it says Custom mud and race truck and there is a pic there.

Its in my gallery, Its a s15 cab sittin down on a 1-ton frame and running gears, with a built 327.

I run 44s on it now and it turns em over very well. I just put a lift on it and I need some bigger tires.

I believe a 450hp sbc should do it.