spalding

pics of the beadlocks

hey do you still have those sand tires if so i'll take them

hey guys just installed my pro circuit pipes and put 290 mains and a 27.5 pilot in at 400 ft elevation and pro design air filter with snorkel removed and after i put it back together and everything when i push the throttle and it gets stuck and has no tension to pull it back. i tightened the cable and it still does the same thing anyone know a solution?

hey i was wondering your guys opinions on a color scheme for my banshee.I want it to be a head turner because of the colors .any advice/opinions would be greatly appreciated. photos would also be helpful

all i need is a place to take it to, to have it disassembled and then put back together. anyone know someone?

i live in Bakersfield which is about 2 hours north of los angeles and 1 and a half hours south of Fresno.

Hey i was wondering what was a good place in calafornia to get my frame and other parts powder coated and a place to take the bike to to have someone take everything out so this can be accomplished thanks

hey i was wondering how to move the needle clip up from stock bought pro circuits and installed them and bought 280mmain and 27.5 pilot and wondered if i should move needle clip

so don' buy 280's if i use no lid

so what is the difference between genuine and oem equivalent mikuni jets?

i also will be testing with and without the lid and the coldest i will be riding in is 45-55 so not to cold

so just buy 27.5 pilots and 280 and 290 mains

yea i might build off my dads which has re built engine to 385cc

hey i need to know for sure before i rejet my bike, that is bone stock besides pro design air filter and pro circuit pipes, will be jetted for 35-65 degree weather, my jets i believe i should use is 280 mains and 27.5 pilot and elevation is at 400ft, what do you think?

i plan on more than that i plan on building it from the ground up

hey guys got some exciting news for me that i plan on building a banshee with a stock a arm frame and plan on putting pro circuit pipes on and i am open to any suggestions or questions you guys have i also plan on installing +2+1 arms with either works,elka, or fox shocks and a +4 swing arm. i don't know who i will buy all these products from but most likely site sponsors or wherever i can get a good deal i need yoour guys opinions and info on some things and aprecciate any advice given and i just wonder starting with color scheme what i should paint the frame, etc........

i think mine might be late it is a 2000

hey this is a stupid question but how are you supposed to take the headlight cages off without cutting them? thanks

so who is going to gordons well or buttercup

how much would you want for them cut?

i was wondering what exhaust clamps to use for pro circuit pipes can i use stock or what should i get/

i believe someone asked this question before and that the answer was no but if you are going to get that bike you might as well buy some pro circuit sliencers on here or ebay or something because i personally believe pro circuit sounds better but i don't know about you.

yea my cousin runs 40:1 castor 927 and my dad runs a mix of 2 gallons gas and 2 gallons race gas so i just wondered what would be best thanks for the replies

well my elevation 408 just found out will it change anything

hey i have barely any mods just pro circuits and pro design air filter with lid box at 350ft and still have to rejet just wonder what ratio to mix at and which oil to mix with