tgriffin27

Sounds like you need to clean the carbs and use fresh gas. I always use sta-bil in my gas also. How long has it been sitting and are you running the old gas from when you parked it?

Thanks for the advice guys. I ended up buying everything he had left after he sold his banshee. Lonestar A-arms,Tie Rods,Skid Plates,Complete Rear Brake Light and LoneStar Adjustable Axle For $400 Dollars. Now I have to figure out how wide these are they don't look like +3's to me but I don't know much about suspension.

Just got back from buying the stuff. He was a really nice guy and we talked for hours. I got the Lonestar A-arms,Tie Rods,Skid Plates,Complete Rear Brake Light Assembly with Wiring and I got the Lonestar Adjustable Axle for the really awesome price of $400 Dollars. He HOOKED Me Up. I will post pictures here tommorow of all the stuff got to go to bed now I am tired he lived about a hour from me one way. Will install the axle hopefully sunday and the control arms after May 15 because I am going to a bansheehg meet and ride and dont want to lower it any till after that ride.

can I get a picture of the rear shock?

Glad to hear that. I just called hm and he still has them for sale and he also has the lonestar rear axle to go with them he wants $200 for it.

Just called him and he still has them and he also has a Gently used solid Chrome Lonestar brand axel for 04 banshee -goes from stock to +3 inches that he wants 200 dollars for. Sounds really expensive to me for a axle but I don't know the pricing on lonestar parts.

Thanks I Didn't Know That

I want to get rid of my boost bottle after reading all the post's about it cracking my intake and not being good for anything. Anyone have a stock tube for sale? Been trolling the f/s threads but all the ones I have seen on there are long gone

Annoying Orange x1 Every post whore thread needs him

Would you be willing to sell the nerfs seperate?

Damn zilla go easy on him I am assuming he didn't bother to read any of the post's today..........?

Did you ever sell the carbs? I'm interested.

Do you still have the crossover tube for sale?

PM Sent

I want to run flattrack this year and I just bought a 2006 banshee to do this with but I barely know all the mods that have been done to it, as far as I know my banshee is basically stock with a few bolt ons. Right now my banshee is 45 inches wide in the front and the track I want to run at has a 50 inch wide maxium rule. I have found a set of lonestar +2 +3 A arms (Upper and Lower) with tie rods and GYT-R skid plates for $300 dollars that look to be new. I am hoping that I already have longer +1 or +2 A arms on my banshee so I can buy these parts and not put my banshee over the 50 inches in width rule. 1. What was the width of the banshee from the factory so I can tell if mine has aftermarket A arms? 2. Is 300 dollars a good deal on these parts that are in the pictures? 3. Are +2 +3 A arms good to run flat track with or are they too long? I have been reading on here that most flattrackers are running +2 +1 A arms. Thanks for the help I don't want to buy these and not be able to use them.

Do you still have these for sale?

PM Sent Are They Still For Sale?

I want a set of works shocks and I want these because they are a great deal. My question is I want to flat track my 06 banshee this year and will these shocks work for that application? Right now I have been invited to run some XC/Scramble races and I wouldn't have to spend much money to run those as the guy i bought my banshee from used it for that purpose. I am 208 lbs and since these are setup for dune sand racing can I use them the way they are setup without hurting them or will they need to be setup for the racing I will be doing so I don't damage them? I am on a limited budget right now and would like to use them as they are till I can afford to have them setup for my weight and riding style.

I want to run flattrack this year and I just bought a 2006 banshee to do this with but I barely know all the mods that have been done to it, as far as I know my banshee is basically stock with a few bolt ons. Right now my banshee is 45 inches wide in the front and the track I want to run at has a 50 inch wide maxium rule. I have found a set of lonestar +2 +3 A arms (Upper and Lower) with tie rods and GYT-R skid plates for $300 dollars that look to be new. I am hoping that I already have longer +1 or +2 A arms on my banshee so I can buy these parts and not put my banshee over the 50 inches in width rule. 1. What was the width of the banshee from the factory? 2. Is 300 dollars a good deal on these parts? 3. Are +2 +3 A arms good to run flat track with? I have been reading on here that most flattrackers are running +2 +1 A arms. Thanks for the help I don't want to buy these and not be able to use them.

THANK GOD I saw this post this morning. I was just about to buy a few things from from this scammer's website. I want even call him a guy or business man after reading all the bad things. I have been looking on ebay all weekend for part's and was going to overlook his negavtive feedback because he was a member on this site so I thought he must be a good guy. Why is he even still allowed to be a member here or advertise his parts here in his signature? BAN HIM!!!! I am a noob to this site and almost got scammed by buying something from him. This thread should be a sticky so us new guys that don't know him will not be scammed, if he isn't going to get banned from the site. I love the quote below! Seems to me if he doesn't need our business he should be kicked off the site! Better Yet he should just be a man and get the balls enough to leave on his on. We don't need people like him messing up this Great Site. It's people like him that give Good Sellers a bad name. It's really sad because ebay keeps people like him on there website too Quote: I used to give discount for the HQ guys, but I dont anymore. I dont even bother chasing them anymore, its not worth it. Not sure what else I can do, but I dont let it bother me, I sold 1000 parts this month alone, I can handle one return. I sold more on ebay this month that ever, so obviously the HQ bashing isnt hurting too much. I still love those guys on there, but the new guys are killing it. - minkia38

Count me in also, It's only a 3 hour drive from kernersville and I have been looking for a place to ride near me.

My 2006 is engine number 3GG-28236 Hope this helps someone.

Anybody run FMF Fatty's on a flat track? I am wanting to race flat track this year and i have a set of FMF fatty's on my shee.

I have a Barnett Clutch in my 2006 with stock springs installed last year. The clutch has held up really well. The only engine mods I have are FMF Gold Series Pipes and K&N Air Filters