aleyesonme

Not at all..I appreciate it all. But yes I'm sure. If it was on wrong I noticed there would be a gap. But there isn't. And the pressure plate is seated against the clutch fiber

Actually I just put a new cable on....its not on exactly like the old one, cause there's a lil spot where the old one came from that i can't get to...and still with the old cable still did the Same thing. The cable works just fine....am I suppose to be able to turn the lockup and pressure plate when the clutch lever is out?

I did notice that when I turn the lockup that's on the pressure plate, it just spins, I would think that the pressure on the fiber would not allow it to turn, this is while the bike is off of course and In neutral. Is this normal?

Yes...never took it out...plus I checked to make sure it was there and it is. I was told that if the clutch plate is on correct, then u should be able to push the actuator and it would push the clutch out...which it did. Everything is lined up like the manual says and double checked and still NOTHING :-( :-(

I DID....3 Times....every time I open it up, I'm looking for something wrong and everything looks right...the pressure plate suppose to seat against the last clutch fiber right?

Yes...worked great...I just changed cause I thought it needed em

Yes, cable is on, yes 7 fibers and six steels, yes they are all in, fibers were soaked prior to install. What do you mean actuator not pulled through? What do I look for?

Pressure plate was lined up right. ....

I'm pretty sure it's lined up correctly, went by the manual...but I'll check again right now

Hello, I simply changed the clutches cause I thought it was time since I ran the old ones for a year...ran just fine....all I did was change them, now it won't engage, just sits there when I let off the clutch. I even went back in and adjusted the eccentric screw so the actuator lines up with the arrow on the cases. Still nothing...please help, what else could cause this issue.

Great guy to deal with, and yeah I got my wheels...thanks

Thank you, how kind... ill be letting you know if I decide to do that

Oh ok,.in that case I'll gett pics up when I go on lunch...thank you

From the replies, I see its not a reputable port that's worth looking into....THANK YOU ALL for the replies.

RU? Is that his screen name?

Need help, can some one recognize what port this could be, or may look like. ..thanks is advance

Those are 10" wheels correct?

What size are those tires....great gift to myself....

??

Can u send me a pic of the other side of the hubs...I'm interested. ....3362553323

Are those rear or front hubs?

Guess I need to clarify.....when I say new is that a buddy had a extra one and I used that one, so to eliminate that maybe being the problem, I put my original cdi back on since I realized that wasn't the problem to begin with.. ..so I didn't have to spend anything...

Just wanna say thanks to everyone that help me on this post, I readjusted my pickup coil as well as a new cdi box....not sure which fixed the problem, but it runs great again....thanks again

Man u Got robbed..I pay 10 bucks for both dismount and mount for two

Thank you...I will do the correct way...and get a gauge...and try it out