dieselhead

going to yank carbs tonight will check the floats never noticed the brass ball before the chock tube is on have ran into that problem years ago just tried starting it earlier and my leg about fell off , seems really rich when it started smoked like hell bobling then clears out but i could be all wrong thanks for help i know its hard to fix things without being there hands on

have cleand several times will try the jets but it doesnt make any sense y mine starts fine and has same set up but different pipes with same jetting

just did a topend on the wifes bike , having trouble with it starting when its cold had this problem before the build i have to kick the shit out of it and it will start then die then git it started again and its a struggle to keep running . I have not done anything to engine asfare as mods that would affect jetting ,bore is stock with stock head only mod is timming plate slides are timed , pilot is stock main is 300 and needles clips are one down from center also has t5s p,s once the thing is warm its fine

ok , go buy some cheap end wrenches cut the box end off which is the closed end and weld a 6 inch extension to the side of the wrech u cut off then add about 2 foot lbs to the 20 that is called for